*feinputwithdata2 - UG

Syntax

*feinputwithdata2 - UG

Description

"SELECTIONS <A B C D E F G H I J>" ""
"BEGIN_PARTS" "<PART_LIST>" "END_PARTS" ""
"BEGIN_LAYERINFO" "DISABLE <DISABLED_LAYERS>" "ENABLE <ENABLED_LAYERS>" "END_LAYERINFO" ""
"BEGIN_CATEGORIES" "<CATEGORIES>" "<CATEGORIES>" "END_CATEGORIES" ""
"COMPONENT_NAME <COMPONENT_NAME_FORMAT>" ""

The <RED PARAMETERS> are user editable and have the following options, with the following values:

Inputs

A

Coordinate system:

• 0 - Global
• 1 - Local

B

Layer filtering:

• 0 - Midsurface only
• 1 - Solid only
• 2 - Solid and Midsurface

C

Create welds in HyperMesh:

• 0 - No
• 1 - Yes

D

Export to main weld file:

• 0 - No
• 1 - Yes

E

Include invisible geometry:

• 0 - No
• 1 - Yes

F

Display by:

• 0 - Categories
• 1 - Layers

G

Merge assemblies:

• 0 - No
• 1 - Yes

H

Part count:

• 0 - All parts, otherwise part count

I

Save settings as default:

• 0 - No
• 1 - Yes

J

Include wireframe geometry:

• 0 - No
• 1 - Yes

<PART_LIST>

A list of all selected parts. This section is generally not user editable; its format uses UG internal entity handles. If H is 0, the <PART_LIST> should be empty (default).

<DISABLED_LAYERS>

Disabled layers, as entered in the Part Browser. If layers are enabled using <ENABLED_LAYERS>, this parameter should be blank (default). This is only required when F is 1.

<ENABLED_LAYERS>

Enabled layers, as entered in the Part Browser. If layers are disabled using <DISABLED_LAYERS>, this parameter should be blank. By default, this option is "*". This is only required when F is 1.

<CATEGORIES>

A list of categories to be imported. Each category is its own string. If this parameter is blank all categories are imported (default). This is only required when F is 0.

<COMPONENT_NAME_FORMAT>

The component name format, as entered in the Part Browser. The default name format is "default".