*elementtestorthogonality

Tests 3D elements for whether or not they pass the orthogonality element quality check, and puts those that fail on the specified outputmark.

Syntax

*elementtestorthogonality entity_type input_mark_id orthogonality output_mark_id dimension contour title

Type

HyperMesh Tcl Modify Command

Description

Tests 3D elements for whether or not they pass the orthogonality element quality check, and puts those that fail on the specified outputmark.

Inputs

entity_type
The entity types to be checked. Currently, elements is the only allowable option.
input_mark_id
The mark that contains the elements to test.
orthogonality
The value to use as a threshold beyond which elements should be considered to have failed the test.
output_mark_id
The mark where HyperMesh should put the elements that fail the test.
dimension
A code telling to measure the dimension of:
  • 4 - Measure 3D elements.
contour
A code telling if HyperMesh should:
  • 0 - Display the results of the test normally.
  • 1 - Display the elements color coded by their ratings.
  • 2 - Build a histogram showing the distribution of ratings.
title
The title to label the curve in the histogram.

Examples

To test all displayed 3D elements for an orthogonality value less than 0.2:

*createmark elements 1 "displayed"
*createmark elements 2
*elementtestorthogonality elements 1 0.2 2 4 0 "3D Orthogonality")

Errors

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:
if { [ catch {command_name...} ] } {
   # Handle error
}

Version History

2019