*surfacemarkaddnodesfixed

Syntax

*surfacemarkaddnodesfixed surf_mark_id node_mark_id tol reserved_1

Type

HyperMesh Tcl Modify Command

Description

Add fixed points to a surface at locations specified by nodes.

Inputs

surf_mark_id

ID of the mark containing the input surfaces to add fixed points to. Valid values are 1 and 2.

node_mark_id

ID of the mark containing the nodes to use to define the fixed point locations. Valid values are 1 and 2.

tol

Tolerance value used to determine if a node is close enough to a surface.

reserved_1

Reserved parameter, must be set to 0.

Example

To add fixed points to the surface with ID 12 at positions specified by nodes with IDs 1 and 2:

*createmark nodes 1 1 2
*createmark surfs 1 12
*surfacemarkaddnodesfixed 1 1 0.1 0

Errors

if { [ catch {command_name...} ] } {
   # Handle error
}