*renumberall
Renumbers the internal HyperMesh IDs for all entities in the model.
Syntax
*renumberall start_id incr_val offset_val offset_flag
Type
HyperMesh Tcl Modify Command
Description
This command renumbers the internal HyperMesh IDs for all entities in the model.
This command only renumbers HyperMesh internal IDs, even if the selected entities have solver IDs (see *renumbersolveridall).
Inputs
- start_id
- Integer value > 0 specifying the starting value.
- incr_val
- Integer value > 0 specifying the renumbering increment.
- offset_val
- Integer value to use for offsetting. Can be positive or negative as long as after renumbering all entities will have a positive ID.
- offset_flag
- Flag to specify whether to use offsetting:
Example
To renumber the internal HyperMesh IDs of all entities starting from 100 with an increment of 1:
*renumberall 100 1 0 0Errors
Incorrect usage results in a Tcl error. To detect
errors, you can use the catch
command:
if { [ catch {command_name...} ] } {
# Handle error
}