*setcuttingplanecolor

Syntax

*setcuttingplanecolor axis mode color

Type

HyperMesh Tcl Modify Command

Description

Sets the color of the base of the specified cutting plane.

Inputs

axis

The axis that is normal to the plane. Valid values are:

• 0 - the plane with x-axis as its normal
• 1 - the plane with y-axis as its normal
• 2 - the plane with z-axis as its normal

mode

Sets the display mode for the specified cutting plane. Valid values are:

• 0 - solid color
• 1 - contours

color

The color to use when mode=0. Valid values are 1-64.

Example

To set the cutting plane with y-axis as its normal to use solid color 24:

*setcuttingplanecolor 1 0 24

Errors

if { [ catch {command_name...} ] } {
   # Handle error
}