•Target-specific peripheral blocks for programming the following devices:
•AMD64™
•Arduino® Leonardo, Mega 2560, Nano, and Uno
•Raspberry Pi™ Zero, Zero W, 1A+, 1B+, 2B, 3A+, 3B, 3B+, and 4B
•STMicroelectronics® STM32® C0x, F0x, F103x, F3x, F4x, F7x, G0x, G4x, H7x, L4x, and WBx
•Texas Instruments™ ARM® Cortex® M3, C2000, Delfino, MSP430, and Piccolo
•Blocks for communicating with the target device and performing analog and digital I/O operations with the analog and digital ports on the target device
•Texas Instruments Digital Motor Control and MotorWare blocks
•Enhanced automatic C code generators to produce code that will run on your device
Intellectual Property Rights Notice:
Copyright ©1986-2024 Altair Engineering Inc. All Rights Reserved.
This Intellectual Property Rights Notice is exemplary, and therefore not exhaustive, of the intellectual property rights held by Altair Engineering Inc. or its affiliates. Software, other products, and materials of Altair Engineering Inc. or its affiliates are protected under laws of the United States and laws of other jurisdictions.
In addition to intellectual property rights indicated herein, such software, other products, and materials of Altair Engineering Inc. or its affiliates may be further protected by patents, additional copyrights, additional trademarks, trade secrets, and additional other intellectual property rights. For avoidance of doubt, copyright notice does not imply publication. Copyrights in the below are held by Altair Engineering Inc. or its affiliates. Additionally, all non-Altair marks are the property of their respective owners. If you have any questions regarding trademarks or registrations, please contact marketing and legal.
This Intellectual Property Rights Notice does not give you any right to any product, such as software, or underlying intellectual property rights of Altair Engineering Inc. or its affiliates. Usage, for example, of software of Altair Engineering Inc. or its affiliates is governed by and dependent on a valid license agreement.
Altair® HyperWorks®, a Design & Simulation Platform
Altair® AcuSolve® ©1997-2024
Altair® Activate® ©1989-2024
Altair® Automated Reporting Director™ ©2008-2022
Altair® Battery Damage Identifier™ ©2019-2024
Altair® CFD™ ©1990-2024
Altair Compose® ©2007-2024
Altair® ConnectMe™ ©2014-2024
Altair® DesignAI™ ©2022-2024
Altair® EDEM™ ©2005-2024
Altair® EEvision™ ©2018-2024
Altair® ElectroFlo™ ©1992-2024
Altair Embed® ©1989-2024
Altair Embed® SE ©1989-2024
Altair Embed®/Digital Power Designer ©2012-2024
Altair Embed®/eDrives ©2012-2024
Altair Embed® Viewer ©1996-2024
Altair® e-Motor Director™ ©2019-2024
Altair® ESAComp® ©1992-2024
Altair® expertAI™ ©2020-2024
Altair® Feko® ©1999-2024
Altair® FlightStream® ©2017-2024
Altair® Flow Simulator™ ©2016-2024
Altair® Flux® ©1983-2024
Altair® FluxMotor® ©2017-2024
Altair® GateVision PRO™ ©2002-2024
Altair® Geomechanics Director™ ©2011-2022
Altair® HyperCrash® ©2001-2023
Altair® HyperGraph® ©1995-2024
Altair® HyperLife® ©1990-2024
Altair® HyperMesh® ©1990-2024
Altair® HyperMesh® CFD ©1990-2024
Altair® HyperMesh ® NVH ©1990-2024
Altair® HyperSpice™ ©2017-2024
Altair® HyperStudy® ©1999-2024
Altair® HyperView® ©1999-2024
Altair® HyperView Player® ©2022-2024
Altair® HyperWorks® ©1990-2024
Altair® HyperWorks® Design Explorer ©1990-2024
Altair® HyperXtrude® ©1999-2024
Altair® Impact Simulation Director™ ©2010-2022
Altair® Inspire™ ©2009-2024
Altair® Inspire™ Cast ©2011-2024
Altair® Inspire™ Extrude Metal ©1996-2024
Altair® Inspire™ Extrude Polymer ©1996-2024
Altair® Inspire™ Form ©1998-2024
Altair® Inspire™ Mold ©2009-2024
Altair® Inspire™ PolyFoam ©2009-2024
Altair® Inspire™ Print3D ©2021-2024
Altair® Inspire™ Render ©1993-2024
Altair® Inspire™ Studio ©1993-2024
Altair® Material Data Center™ ©2019-2024
Altair® Material Modeler™ ©2019-2024
Altair® Model Mesher Director™ ©2010-2024
Altair® MotionSolve® ©2002-2024
Altair® MotionView® ©1993-2024
Altair® Multi-Disciplinary Optimization Director™ ©2012-2024
Altair® Multiscale Designer® ©2011-2024
Altair® newFASANT™©2010-2020
Altair® nanoFluidX® ©2013-2024
Altair® NLView™ ©2018-2024
Altair® NVH Director™ ©2010-2024
Altair® NVH Full Vehicle™ ©2022-2024
Altair® NVH Standard™ ©2022-2024
Altair® OmniV™ ©2015-2024
Altair® OptiStruct® ©1996-2024
Altair® physicsAI™ ©2021-2024
Altair® PollEx™ ©2003-2024
Altair® PSIM™ ©1994-2024
Altair® Pulse™ ©2020-2024
Altair® Radioss® ©1986-2024
Altair® romAI™ ©2022-2024
Altair® RTLvision PRO™ ©2002-2024
Altair® S-CALC™ ©1995-2024
Altair® S-CONCRETE™ ©1995-2024
Altair® S-FRAME® ©1995-2024
Altair® S-FOUNDATION™ ©1995-2024
Altair® S-LINE™ ©1995-2024
Altair® S-PAD™ © 1995-2024
Altair® S-STEEL™ ©1995-2024
Altair® S-TIMBER™ ©1995-2024
Altair® S-VIEW™ ©1995-2024
Altair® SEAM® ©1985-2024
Altair® shapeAI™ ©2021-2024
Altair® signalAI™ ©2020-2024
Altair® Silicon Debug Tools™ ©2018-2024
Altair® SimLab® ©2004-2024
Altair® SimLab® ST ©2019-2024
Altair® SimSolid® ©2015-2024
Altair® SpiceVision PRO™ ©2002-2024
Altair® Squeak and Rattle Director™ ©2012-2024
Altair® StarVision PRO™ ©2002-2024
Altair® Structural Office™ ©2022-2024
Altair® Sulis™©2018-2024
Altair® Twin Activate® ©1989-2024
Altair® UDE™ ©2015-2024
Altair® ultraFluidX® ©2010-2024
Altair® Virtual Gauge Director™ ©2012-2024
Altair® Virtual Wind Tunnel™ ©2012-2024
Altair® Weight Analytics™ ©2013-2022
Altair® Weld Certification Director™ ©2014-2024
Altair® WinProp™ ©2000-2024
Altair® WRAP™ ©1998-2024
Altair® HPCWorks®, a HPC & Cloud Platform
Altair® Allocator™ ©1995-2024
Altair® Access™ ©2008-2024
Altair® Accelerator™ ©1995-2024
Altair® Accelerator™ Plus ©1995-2024
Altair® Breeze™ ©2022-2024
Altair® Cassini™ ©2015-2024
Altair® Control™ ©2008-2024
Altair® Desktop Software Usage Analytics™ (DSUA) ©2022-2024
Altair® FlowTracer™ ©1995-2024
Altair® Grid Engine® ©2001, 2011-2024
Altair® InsightPro™ ©2023-2024
Altair® Hero™ ©1995-2024
Altair® Liquid Scheduling™ ©2023-2024
Altair® Mistral™ ©2022-2024
Altair® Monitor™ ©1995-2024
Altair® NavOps® ©2022-2024
Altair® PBS Professional® ©1994-2024
Altair® PBS Works™ ©2022-2024
Altair® Software Asset Optimization (SAO) ©2007-2024
Altair® Unlimited™ ©2022-2024
Altair® Unlimited Data Analytics Appliance™ ©2022-2024
Altair® Unlimited Virtual Appliance™ ©2022-2024
Altair® RapidMiner®, a Data Analytics & AI Platform
Altair® AI Hub ©2023-2024
Altair® AI Edge ©2023-2024
Altair® AI Cloud ©2022-2024
Altair® AI Studio ©2023-2024
Altair® Analytics Workbench™ ©2002-2024
Altair® Co-Pilot™ ©2023-2024
Altair® Graph Lakehouse™ ©2013-2024
Altair® Graph Studio™ ©2007-2024
Altair® Knowledge Hub™ ©2017-2024
Altair® Knowledge Studio® ©1994-2024
Altair® Knowledge Studio® for Apache Spark ©1994-2024
Altair® Knowledge Seeker™ ©1994-2024
Altair® IoT Studio™ ©2002-2024
Altair® Monarch® ©1996-2024
Altair® Monarch® Classic ©1996-2024
Altair® Monarch® Complete™ ©1996-2024
Altair® Monarch® Data Prep
Studio ©2015-2024
Altair®
Monarch Server™
©1996-2024
Altair® Panopticon™ ©2004-2024
Altair® Panopticon™ BI ©2011-2024
Altair® SLC™ ©2002-2024
Altair® SLC Hub™ ©2002-2024
Altair® SmartWorks™ ©2002-2024
Altair® RapidMiner® ©2001-2024
Altair One® ©1994-2024
Altair® License Utility™ ©2010-2024
Altair® TheaRender® ©2010-2024
OpenMatrixTM ©2007-2024
OpenPBS® ©1994-2024
OpenRadiossTM ©1986-2024
Embed supports hardware devices that use the words master and slave to describe relationships in bus modes, communication protocols, and connections. We recognize that these words are inappropriate and offensive. We are evaluating how to change these words without introducing technical confusion.