Embedded Category: F280x
Block Category: TI 32-bit DMC
Operating Mode Availability
•Simulation mode: YES
•C code generation mode: YES
The SMO Position Estimator block uses phase currents to estimate the rotor position. This block is useful in sensorless motor control.
Base Current: Indicates the maximum current flow at the rated load.
Base Phase Voltage: Indicates the base phase voltage.
Kslf: Indicates the sliding control filter gain.
Kslide: Indicates the sliding control gain.
Sampling Frequency: Indicates sampling rate of the control running on the target.
Stator Inductance: Indicates motor parameters.
Stator Resistance: Indicates the stator resistance.