Embedded Category: F280x
Block Category: TI 32-bit DMC
Operating Mode Availability
•Simulation mode: YES
•C code generation mode: YES
The ACI Current Model block infers rotor position from D and Q (park transformed) current measurements. This is useful for sensorless control of AC induction motors.
Magnetizing Inductance (H): Indicates the magnetizing inductance of the load. Specify this value in henries.
Max Flux Speed (Rad/Sec): Indicates the maximum rotor flux speed. Specify this value in rad/sec.
Pole Count: Indicates the number of poles in the motor.
Rotor Leakage Inductance (H): Indicates the rotor leakage inductance of the load. Specify this value in henries.
Rotor Resistance (Ohms): Indicates the rotor resistance of the load.
Sampling Frequency (Hz): Indicates sampling rate of the control running on the target.