Using SD16 Config

Target Category: MSP430

The SD16 Config block lets you choose the hardware settings for the SD16 and SD16A blocks for the supported devices. Before you configure the SD16 hardware, it is a good idea to first insert a corresponding target configuration block in your diagram and specify the CPU device.


Clock Source: Selects the ADC clock.

Clock Scaling: Selects the divider for the ADC clock.

Continuous Conversion: Keeps the SD16 unit running continuously.

Enable 1.2V Internal Vref: Allows you to enable the internal voltage reference.

Enable 1.2V Internal Vref 1mA Buffer: Allows you to increase the power of the enabled internal reference voltage.

Lower Power Mode: Runs in low power mode.