Target Category: STM32
Target Sub-Category: GPIO
Description: The GPIO Input block reads digital data into the diagram.
Bit Width: Specifies the number of contiguous bits to read in.
Channel: Indicates the channel number.
GPIO Mode: Indicates the GPIO mode.
Offset: Specifies the offset into the digital port register.
Port: Specifies the digital register.
Pull up/down: Performs the selected action:
Pull Up: Turns the upper resistor ON and ties
the pin to VDD.
Pull Down: Turns the lower resistor ON and ties the
pin to ground.
None: Neither resistor is activated.
Speed: Selects the frequency. See the device datasheet for the frequency specifications.
Title: Indicates the channel title.