`GeometryRepair`

A grouping of various geometry repair tools.

Example

application = cf.Application.GetInstance()
project = application:NewProject()

cuboid = project.Contents.Geometry:AddCuboid(cf.Point(0,0,0),1,1,1)
primitive = cuboid:ConvertToPrimitive()

    -- Retrieve the RemoveSmallEdgesEnabled repair parts setting

removeSmallEdgesEnabled = project.Contents.Geometry.Repair.RepairPartsSettings.RemoveSmallEdgesEnabled

    -- Repair the geometry primitive

project.Contents.Geometry.Repair:RepairParts({primitive})

Inheritance

The GeometryRepair object is derived from the Object object.

Usage locations

The GeometryRepair object can be accessed from the following locations:

Properties
- GeometryCollection collection has property Repair.

Property List

Label: The object label. (Read/Write string)
RemoveSmallFeaturesSettings: The settings to be used while doing the remove small features operation. (Read only RemoveSmallFeaturesSettings)
RepairAndSewFacesSettings: The settings to be used while doing the repair and sew faces operation. (Read only RepairAndSewFacesSettings)
RepairEdgesSettings: The settings to be used while doing the repair edges operation. (Read only RepairEdgesSettings)
RepairPartsSettings: The settings to be used while doing the repair part operation. (Read only RepairPartsSettings)
SimplifyPartRepresentationSettings: The settings to be used while doing the simplify part representation operation. (Read only SimplifyPartRepresentationSettings)
Type: The object type string. (Read only string)

Method List

Delete (): Deletes the entity.
Duplicate (): Duplicates the entity. (Returns a Object object.)
GetProperties (): Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step. (Returns a table object.)
RemoveSmallFeatures (geometrylist List of Geometry): Removes the small features of the specified geometry parts.
RepairAndSewFaces (geometrylist List of Geometry): Repair and sew the faces of the specified geometry parts. (Returns a List of RepairAndSewFaces object.)
RepairEdges (geometrylist List of Geometry): Repair the edges of the specified geometry parts.
RepairParts (geometrylist List of Geometry): Repair the specified geometry parts. (Returns a List of RepairPart object.)
SetProperties (properties Object): Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
SimplifyParts (geometrylist List of Geometry): Simplify the representation of the specified geometry parts.

Static Function List

GetDefaultProperties (): Creates a table containing the default settings to create an object. (Returns a table object.)

Property Details

Label

The object label.

Type: string
Access: Read/Write

RemoveSmallFeaturesSettings

The settings to be used while doing the remove small features operation.

Type: RemoveSmallFeaturesSettings
Access: Read only

RepairAndSewFacesSettings

The settings to be used while doing the repair and sew faces operation.

Type: RepairAndSewFacesSettings
Access: Read only

RepairEdgesSettings

The settings to be used while doing the repair edges operation.

Type: RepairEdgesSettings
Access: Read only

RepairPartsSettings

The settings to be used while doing the repair part operation.

Type: RepairPartsSettings
Access: Read only

SimplifyPartRepresentationSettings

The settings to be used while doing the simplify part representation operation.

Type: SimplifyPartRepresentationSettings
Access: Read only

Type

The object type string.

Type: string
Access: Read only

Method Details

Delete ()

Deletes the entity.

Duplicate ()

Duplicates the entity.

Return

Object: The new (duplicated) entity.

GetProperties ()

Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step.

Return

table: A table defining the properties.

RemoveSmallFeatures (geometrylist List of Geometry)

Removes the small features of the specified geometry parts.

Input Parameters

geometrylist(List of Geometry): The list of geometry to be cleaned.

RepairAndSewFaces (geometrylist List of Geometry)

Repair and sew the faces of the specified geometry parts.

Input Parameters

geometrylist(List of Geometry): The list of geometry that must be repaired.

Return

List of RepairAndSewFaces: void.

RepairEdges (geometrylist List of Geometry)

Repair the edges of the specified geometry parts.

Input Parameters

geometrylist(List of Geometry): The list of geometry that must be repaired.

RepairParts (geometrylist List of Geometry)

Repair the specified geometry parts.

Input Parameters

geometrylist(List of Geometry): The list of geometry that must be repaired.

Return

List of RepairPart: void.

SetProperties (properties Object)

Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.

Input Parameters

properties(Object): A table of properties defining the new state of the object.

SimplifyParts (geometrylist List of Geometry)

Simplify the representation of the specified geometry parts.

Input Parameters

geometrylist(List of Geometry): The list of geometry that must be simplified.

Static Function Details

GetDefaultProperties ()

Creates a table containing the default settings to create an object.

Return

table: A table containing the default properties.