ComplexLoad
A cable complex load component.
Example
application = cf.Application.GetInstance() project = application:Load({FEKO_HOME..[[/shared/Resources/Automation/Cables.cfx]]}) -- Add 'CableComplexLoad' with 50 Ohms real and -25 Ohms imaginary impedance cableHarness = project.Contents.CableHarnesses["CableHarness1"] cableHarnessView = application.MainWindow.MdiArea:CreateCableSchematicView(cableHarness) terminal1 = cableHarness.Connectors["CableConnector2"].Pins["Pin2"].Terminal terminal2 = cableHarness.Connectors["CableConnector2"].Pins["Pin1"].Terminal resistor = cableHarness.CableSchematic.Components:AddComplexLoad(terminal1, terminal2, 50, 25) -- Change the load's real impedance to 75 Ohms cableHarness.CableSchematic.Components["Z1"].ImpedanceReal = 75
Inheritance
The ComplexLoad object is derived from the Object object.
Usage locations
The ComplexLoad object can be accessed from the following locations:
- Methods
- CableSchematicComponentCollection collection has method AddComplexLoad(FAIL - unsupported type).
- CableSchematicComponentCollection collection has method AddComplexLoad(Terminal, Terminal, Expression, Expression).
- CableSchematicComponentCollection collection has method AddComplexLoad(table).
Property List
- ComplexLoadType
- Select whether to use a complex number or a single port Touchstone file. (Read/Write ComplexLoadTypeEnum)
- CurrentProbeEnabled
- True if a current probe must be applied to the component. (Read/Write boolean)
- Filename
- The Touchstone file. This is only valid if the CableComplexLoadType has the type SinglePortTouchstone. (Read/Write FileReference)
- ImpedanceImaginary
- The imaginary impedance of the complex load. (Read/Write ParametricExpression)
- ImpedanceReal
- The real impedance of the complex load. (Read/Write ParametricExpression)
- Label
- The object label. (Read/Write string)
- Schematic
- The schematic associated with this item. (Read only Schematic)
- SchematicLocation
- The location of the item on the schematic. (Read only GridLocation)
- SchematicRotation
- The rotation of the item on the schematic. (Read only SymbolRotationEnum)
- Terminals
- The schematic terminals on this item. (Read only List of Terminal)
- Type
- The object type string. (Read only string)
- VoltageProbeEnabled
- True if a current probe must be applied to the component. (Read/Write boolean)
Method List
- Delete ()
- Deletes the entity.
- Duplicate ()
- Duplicates the entity. (Returns a Object object.)
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step. (Returns a table object.)
- RotateSchematicSymbol ()
- Rotates the item on the schematic.
- SetProperties (properties Object)
- Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
- SetSchematicLocation (location GridLocation)
- Sets the location of the item on the schematic.
- SetSchematicRotation (rotation SymbolRotationEnum)
- Sets the rotation of the item on the schematic.
Static Function List
- GetDefaultProperties ()
- Creates a table containing the default settings to create an object. (Returns a table object.)
Property Details
- ComplexLoadType
- Select whether to use a complex number or a single port Touchstone file.
- Type
- ComplexLoadTypeEnum
- Access
- Read/Write
- CurrentProbeEnabled
- True if a current probe must be applied to the component.
- Type
- boolean
- Access
- Read/Write
- Filename
- The Touchstone file. This is only valid if the CableComplexLoadType has the type SinglePortTouchstone.
- Type
- FileReference
- Access
- Read/Write
- ImpedanceImaginary
- The imaginary impedance of the complex load.
- Type
- ParametricExpression
- Access
- Read/Write
- ImpedanceReal
- The real impedance of the complex load.
- Type
- ParametricExpression
- Access
- Read/Write
- Label
- The object label.
- Type
- string
- Access
- Read/Write
- Schematic
- The schematic associated with this item.
- Type
- Schematic
- Access
- Read only
- SchematicLocation
- The location of the item on the schematic.
- Type
- GridLocation
- Access
- Read only
- SchematicRotation
- The rotation of the item on the schematic.
- Type
- SymbolRotationEnum
- Access
- Read only
- Terminals
- The schematic terminals on this item.
- Access
- Read only
- Type
- The object type string.
- Type
- string
- Access
- Read only
- VoltageProbeEnabled
- True if a current probe must be applied to the component.
- Type
- boolean
- Access
- Read/Write
Method Details
- Delete ()
- Deletes the entity.
- Duplicate ()
- Duplicates the entity.
- Return
- Object
- The new (duplicated) entity.
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step.
- Return
- table
- A table defining the properties.
- RotateSchematicSymbol ()
- Rotates the item on the schematic.
- SetProperties (properties Object)
- Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
- Input Parameters
- properties(Object)
- A table of properties defining the new state of the object.
- SetSchematicLocation (location GridLocation)
- Sets the location of the item on the schematic.
- Input Parameters
- location(GridLocation)
- The schematic location the item should be moved to.
- SetSchematicRotation (rotation SymbolRotationEnum)
- Sets the rotation of the item on the schematic.
- Input Parameters
- rotation(SymbolRotationEnum)
- The rotation setting.
Static Function Details
- GetDefaultProperties ()
- Creates a table containing the default settings to create an object.
- Return
- table
- A table containing the default properties.