BasisFunctionLocalSolverSettings
Solution basis function control properties. Only applies if basis function control has been enabled in the global solver settings.
Example
application = cf.Application.GetInstance() project = application:NewProject() -- Create a cone cone = project.Contents.Geometry:AddCone(cf.Cone.GetDefaultProperties()) -- Set the cone face to use HOBF cone.Faces[1].BasisFunctionSettings.HOBFEnabled = true
Inheritance
The BasisFunctionLocalSolverSettings object is derived from the CompositeValue object.
Usage locations
The BasisFunctionLocalSolverSettings object can be accessed from the following locations:
- Properties
- MeshCurvilinearTriangleFace object has property BasisFunctionSettings.
- MeshTriangleFace object has property BasisFunctionSettings.
- MeshPlate object has property BasisFunctionSettings.
- MeshTetrahedronRegion object has property BasisFunctionSettings.
- Face object has property BasisFunctionSettings.
- Region object has property BasisFunctionSettings.
- Methods
- BasisFunctionLocalSolverSettingsList object has method Append().
- BasisFunctionLocalSolverSettingsList object has method Get(number).
Property List
- ElementOrder
- Specifies the desired order or allows the solution kernel to select the most appropriate order. Only valid if local basis function control is enabled. (Read/Write HOBFElementOrderEnum)
- HOBFEnabled
- Activates higher order basis functions locally. (Read/Write boolean)
- RangeSelection
- Specifies whether higher, lower or normal orders should be preferred by the solver kernel. Only valid if local basis function control is enabled. (Read/Write BasisFunctionAccuracyEnum)
Property Details
- ElementOrder
- Specifies the desired order or allows the solution kernel to select the most appropriate order. Only valid if local basis function control is enabled.
- Type
- HOBFElementOrderEnum
- Access
- Read/Write
- HOBFEnabled
- Activates higher order basis functions locally.
- Type
- boolean
- Access
- Read/Write
- RangeSelection
- Specifies whether higher, lower or normal orders should be preferred by the solver kernel. Only valid if local basis function control is enabled.
- Type
- BasisFunctionAccuracyEnum
- Access
- Read/Write