`SurfaceBezierCurve`

A surface Bezier curve.

Example

application = cf.Application.GetInstance()
project = application:NewProject()
paraboloid = project.Contents.Geometry:AddParaboloid(cf.Paraboloid.GetDefaultProperties())

    -- Add a work surface around the 'Paraboloid'

workSurface = project.Definitions.WorkSurfaces:Add(paraboloid.Faces["Face1"], 1)

    -- Add a surface bezier curve along the 'WorkSurface'

bezierSurfaceCurve = project.Contents.Geometry:AddSurfaceBezierCurve(workSurface,
                                                            0.4, 0.4,
                                                            0.42, 0.42,
                                                            0.43, 0.43,
                                                            0.7, 0.7)

    -- Increase the curve U' tangent

bezierSurfaceCurve.EndTangentPoint.U = 0.6

Inheritance

The SurfaceBezierCurve object is derived from the AbstractSurfaceCurve object.

Usage locations

The SurfaceBezierCurve object can be accessed from the following locations:

Methods
- GeometryCollection collection has method AddSurfaceBezierCurve(table).
- GeometryCollection collection has method AddSurfaceBezierCurve(WorkSurface, Expression, Expression, Expression, Expression, Expression, Expression, Expression, Expression).
- RepresentationGeometryCollection collection has method AddSurfaceBezierCurve(table).
- RepresentationGeometryCollection collection has method AddSurfaceBezierCurve(WorkSurface, Expression, Expression, Expression, Expression, Expression, Expression, Expression, Expression).

Property List

BoundingBox: A box indicating the bounding box of this entity. (Read only Box). (Read only Box)
EndPoint: The end point of the Bezier curve on the work surface. (Read/Write SurfaceCoordinate)
EndTangentPoint: The end tangent point of the Bezier curve on the work surface. (Read/Write SurfaceCoordinate)
Faulty: Indicates whether the geometry has faults. (Read only boolean)
Included: A boolean value defining if an entity is excluded or included. (Read/Write boolean)
Label: The object label. (Read/Write string)
LocalMeshSettingsEnabled: Control if the locally defined mesh settings should be used for the entity. (Read/Write boolean)
LocalWorkplane: The source workplane. (Read/Write LocalWorkplane)
Locked: A boolean that indicates whether the entity or it's ancestor is locked or not. (Read/Write boolean)
MeshSettings: The locally defined mesh setting to use. This property is only available if LocalMeshSettingsEnabled is true. (Read/Write MeshSettings)
Parent: The parent part of this geometry. If this is a top level part nil will be returned. (Read only Geometry)
SimulationMeshStatus: The status of the simulation mesh. (Read only SimulationMeshStatusEnum)
StartPoint: The start point of the Bezier curve on the work surface. (Read/Write SurfaceCoordinate)
StartTangentPoint: The star tangent point of the Bezier curve on the work surface. (Read/Write SurfaceCoordinate)
Type: The object type string. (Read only string)
WorkSurface: The referenced work surface used to map the U'V' coordinates. (Read/Write WorkSurface)

Collection List

Edges: The collection of edges of the operator. (EdgeCollection of Edge.)
Faces: The collection of faces of the operator. (FaceCollection of Face.)
Regions: The collection of regions of the operator. (RegionCollection of Region.)
Transforms: The collection of transforms on the operator. (TransformCollection of Transform.)
Wires: The collection of wires of the operator. (WireCollection of Edge.)

Method List

ConvertToPrimitive (): Convert the geometry into its primitive base form, returning a new part without the concrete type properties. The reference to the original part will become invalid. (Returns a Geometry object.)
CopyAndMirror (properties table): Apply a copy and mirror using a table defining the properties. (Returns a Object object.)
CopyAndRotate (properties table, count number): Apply a copy and rotate using a table defining the properties. (Returns a List of Object object.)
CopyAndRotate (origin Point, rotationaxis Vector, angle number, count number): Copy and rotate the geometry. (Returns a List of Object object.)
CopyAndTranslate (properties table, count number): Apply a copy and translate using a table defining the properties. (Returns a List of Object object.)
CopyAndTranslate (from Point, to Point, count number): Copy and translate the geometry. (Returns a List of Object object.)
Delete (): Deletes the entity.
Duplicate (): Duplicates the entity. (Returns a Object object.)
Explode (): Explode the geometry into separate surface and edge parts. The new parts represent a snapshot of the geometry at the time it was exploded. (Returns a List of Geometry object.)
GetProperties (): Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step. (Returns a table object.)
ReverseFaceNormals (): Reverse the geometry face normals.
ReverseFaceNormals (faces List of Face): Reverse the geometry face normals.
SetProperties (properties Object): Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
UnlinkMesh (unlinkoption UnlinkMeshOptionEnum): Unlinks the geometry's associated simulation mesh. (Returns a Mesh object.)

Static Function List

GetDefaultProperties (): Creates a table containing the default settings to create an object. (Returns a table object.)

Property Details

BoundingBox

A box indicating the bounding box of this entity. (Read only Box).

Type: Box
Access: Read only

EndPoint

The end point of the Bezier curve on the work surface.

Type: SurfaceCoordinate
Access: Read/Write

EndTangentPoint

The end tangent point of the Bezier curve on the work surface.

Type: SurfaceCoordinate
Access: Read/Write

Faulty

Indicates whether the geometry has faults.

Type: boolean
Access: Read only

Included

A boolean value defining if an entity is excluded or included.

Type: boolean
Access: Read/Write

Label

The object label.

Type: string
Access: Read/Write

LocalMeshSettingsEnabled

Control if the locally defined mesh settings should be used for the entity.

Type: boolean
Access: Read/Write

LocalWorkplane

The source workplane.

Type: LocalWorkplane
Access: Read/Write

Locked

A boolean that indicates whether the entity or it's ancestor is locked or not.

Type: boolean
Access: Read/Write

MeshSettings

The locally defined mesh setting to use. This property is only available if LocalMeshSettingsEnabled is true.

Type: MeshSettings
Access: Read/Write

Parent

The parent part of this geometry. If this is a top level part nil will be returned.

Type: Geometry
Access: Read only

SimulationMeshStatus

The status of the simulation mesh.

Type: SimulationMeshStatusEnum
Access: Read only

StartPoint

The start point of the Bezier curve on the work surface.

Type: SurfaceCoordinate
Access: Read/Write

StartTangentPoint

The star tangent point of the Bezier curve on the work surface.

Type: SurfaceCoordinate
Access: Read/Write

Type

The object type string.

Type: string
Access: Read only

WorkSurface

The referenced work surface used to map the U'V' coordinates.

Type: WorkSurface
Access: Read/Write

Collection Details

Edges

The collection of edges of the operator.

Type: EdgeCollection

Faces

The collection of faces of the operator.

Type: FaceCollection

Regions

The collection of regions of the operator.

Type: RegionCollection

Transforms

The collection of transforms on the operator.

Type: TransformCollection

Wires

The collection of wires of the operator.

Type: WireCollection

Method Details

ConvertToPrimitive ()

Convert the geometry into its primitive base form, returning a new part without the concrete type properties. The reference to the original part will become invalid.

Return

Geometry: The new primitive geometry base.

CopyAndMirror (properties table)

Apply a copy and mirror using a table defining the properties.

Input Parameters

properties(table): A table of properties defining the mirror transform.

Return

Object: The mirrored geometry.

CopyAndRotate (properties table, count number)

Apply a copy and rotate using a table defining the properties.

Input Parameters

properties(table): A table of properties defining the rotate transform.
count(number): The number of transform copies.

Return

List of Object: The list of rotated geometry.

CopyAndRotate (origin Point, rotationaxis Vector, angle number, count number)

Copy and rotate the geometry.

Input Parameters

origin(Point): The coordinates of the origin of the rotation.
rotationaxis(Vector): The axis of rotation.
angle(number): The angle of rotation (degrees).
count(number): The number of copies.

Return

List of Object: The list of rotated geometry.

CopyAndTranslate (properties table, count number)

Apply a copy and translate using a table defining the properties.

Input Parameters

properties(table): A table of properties defining the translate transform.
count(number): The number of transform copies.

Return

List of Object: The list of translated geometry.

CopyAndTranslate (from Point, to Point, count number)

Copy and translate the geometry.

Input Parameters

from(Point): Translate from coordinate.
to(Point): Translate to coordinate.
count(number): The number of copies.

Return

List of Object: The list of translated geometry.

Delete ()

Deletes the entity.

Duplicate ()

Duplicates the entity.

Return

Object: The new (duplicated) entity.

Explode ()

Explode the geometry into separate surface and edge parts. The new parts represent a snapshot of the geometry at the time it was exploded.

Return

List of Geometry: The list of new surface and edge parts.

GetProperties ()

Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step.

Return

table: A table defining the properties.

ReverseFaceNormals ()

Reverse the geometry face normals.

ReverseFaceNormals (faces List of Face)

Reverse the geometry face normals.

Input Parameters

faces(List of Face): The list of faces to reverse normal.

SetProperties (properties Object)

Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.

Input Parameters

properties(Object): A table of properties defining the new state of the object.

UnlinkMesh (unlinkoption UnlinkMeshOptionEnum)

Unlinks the geometry's associated simulation mesh.

Input Parameters

unlinkoption(UnlinkMeshOptionEnum): Mesh ports are created. Solution entities are either keep with their original assignment or reassigned to the new port.

Return

Mesh: The unlinked mesh.

Static Function Details

GetDefaultProperties ()

Creates a table containing the default settings to create an object.

Return

table: A table containing the default properties.