• 2
    • 2016.09 release notes[1]
    • 2016.09 Update 1 release notes[1]
    • 2016.09 Update 2 release notes[1]
    • 2016.09 Update 3 release notes[1]
    • 2016.09 Update 4 release notes[1]
    • 2016.09 Update 5 release notes[1]
    • 2016.09 Update 6 release notes[1]
    • 2016.09 Update 7 release notes[1]
    • 2016.09 Update 8.1-1 release notes[1]
    • 2016.09 Update 8.1-2 release notes[1]
    • 2016.09 Update 8.1 release notes[1]
    • 2016.09 Update 8 release notes[1]
    • 2016.09 Update 9.1 release notes[1]
    • 2016.09 Update 9.2 release notes[1]
    • 2016.09 Update 9.3 release notes[1]
    • 2016.09 Update 9.4 release notes[1]
    • 2016.09 Update 9 release notes[1]
    • 2016.09 Update 10.1 release notes[1]
    • 2016.09 Update 10 release notes[1]
    • 2016.09 Update 11.1 release notes[1]
    • 2016.09 Update 11.2 release notes[1]
    • 2016.09 Update 11.3 release notes[1]
    • 2016.09 Update 11.4 release notes[1]
    • 2016.09 Update 11.5 release notes[1]
    • 2016.09 Update 11 release notes[1]
    • 2016.09 Update 12 release notes[1]
    • 2016.09 Update 13.1 release notes[1]
    • 2016.09 Update 13 release notes[1]
    • 2016.09 Update 14 release notes[1]
    • 2016.09 Update 15 release notes[1]
    • 2016.09 Update 16.1 release notes[1]
    • 2016.09 Update 16 release notes[1]
    • 2016.09 Update 17 release notes[1]
    • 2016.09 Update 18 release notes[1]
    • 2016.09 Update 19 release notes[1]
    • 2016.09 Update 20 release notes[1]
    • 2019.01 release notes[1]
    • 2019.01 Update 1 release notes[1]
    • 2019.01 Update 2 release notes[1]
    • 2019.01 Update 3 Patch 1 release notes[1]
    • 2019.01 Update 3 Patch 2 release notes[1]
    • 2019.01 Update 3 release notes[1]
    • 2019.01 Update 4 Patch 1 release notes[1]
    • 2019.01 Update 4 Patch 2 release notes[1]
    • 2019.01 Update 4 release notes[1]
    • 2019.01 Update 5 Patch 1 release notes[1]
    • 2019.01 Update 5 release notes[1]
    • 2019.01 Update 6 Patch 1 release notes[1]
    • 2019.01 Update 6 release notes[1]
    • 2019.01 Update 7 Patch 1 release notes[1]
    • 2019.01 Update 7 Patch 2 release notes[1]
    • 2019.01 Update 7 Patch 3 release notes[1]
    • 2019.01 Update 7 Patch 4 release notes[1]
    • 2019.01 Update 7 release notes[1]
    • 2020.1 release notes[1]
    • 2021.1.0 release notes[1]
    • 2021.1.0-rs1 patch release notes[1]
    • 2024.1.1[1][2]
    • 2024.1.1 supported operating systems[1]
  • .
  • A
    • about denial reasons[1][2]
    • access control list[1]
    • access to help[1]
    • accuracy[1]
    • ACL[1]
    • add_ALTIUM_LOG[1]
    • add_BETA[1]
    • add_CLEARCASE[1]
    • add_CODEMETER_LOG[1]
    • add_DEBUG_LOG[1]
    • add_DSLS[1]
    • add_DSLS_LOG[1]
    • add_GHS_LEGACY[1]
    • add_GNS[1]
    • add_HASP[1]
    • add_ICAD[1]
    • add_LIC_OPTIONS[1]
    • add_LM_LICENSE_FILE[1]
    • add_LM_LICENSE_FILE configuration file[1]
    • add_LMX[1]
    • add_LSTC[1]
    • add_LUM[1]
    • add_MATHLM[1]
    • add_OLICENSE[1]
    • add_PROCESS_tracking[1]
    • add_QFTEST[1]
    • add_REMOTE_LM[1]
    • add_REPRISE[1]
    • add_RTDAKEY[1]
    • add_SENTINEL[1]
    • add_SILVACO[1]
    • add_TSYSTEMS[1]
    • add a license monitor[1]
    • add an agent using file-based configuration[1]
    • add an agent via an SFD[1]
    • add and configure an agent using the web GUI[1]
    • adjust global defaults[1]
    • adjust parser settings[1]
    • adjust the parsing rate[1]
    • Admin Tab[1]
    • agent configuration[1]
    • agent groups, ACL[1]
    • agent list[1]
    • agent operations, ACL[1]
    • agents[1]
    • agent status[1]
    • alerts[1][2]
    • alerts, administrative controls[1][2]
    • alerts for a license server being monitored are intermittently thrown[1]
    • Altair License Key File (RTDAKEY)[1]
    • altair license server command[1]
    • Altair Monitor Administrator Guide[1]
    • Altair Monitor overview[1]
    • Altium log file[1]
    • a specific tag is missing in the interface[1]
    • assign site[1]
    • automatically set the project for live checkouts[1]
    • automatically start Monitor at system startup - UNIX[1]
    • automatically start Monitor at system startup - Windows[1]
    • automatic backups[1]
    • automatic data loading[1]
    • autostart directory[1]
  • B
    • basic operations and set up[1]
    • batch reporting[1][2]
    • BETA LM[1]
    • bin/bash[1]
    • bin/csh[1]
    • bin/tcsh[1]
    • binary wrapping[1]
    • browser-based configuration[1]
    • bypass ACL instructions[1]
  • C
    • capacity data files[1]
    • case sensitivity[1]
    • change the sampling period for one instance[1]
    • check and clear tag modification history[1]
    • checkout data files[1]
    • checkout details[1][2]
    • checkout duration histogram[1]
    • checkouts[1]
    • checkouts page[1][2]
    • checkout statistics[1]
    • checkout statistics and details[1]
    • check your Monitor system (admin only)[1]
    • CLEANUP_SYSTEM[1]
    • ClearCase[1]
    • CodeMeter log file[1]
    • command line operations[1]
    • command line setup[1]
    • command versions[1]
    • common questions and basic uses[1]
    • components[1]
    • components, monitor[1]
    • configuration[1][2][3]
    • configuration commands[1]
    • configure a batch report[1]
    • configure a failover server replacement[1]
    • configure a license server manager[1]
    • configure an agent[1]
    • configure a notification[1]
    • configure database from the command line[1]
    • configure LDAP[1]
    • configure license servers[1]
    • configure Monitor[1]
    • configure security parameters for specific users[1]
    • configure the tls/ssl protocol[1]
    • configuring monitoring[1]
    • configuring user groups via the vovusergroup utility[1]
    • control access to tag data[1]
    • control center[1]
    • ControlCenter, introduction[1]
    • Control Center set up[1]
    • control which license usage data is loaded[1]
    • crash recovery mode[1]
    • crash recovery restart[1]
    • create a custom report[1]
    • create batch reports via the browser[1]
    • create batch reports via the command line[1]
    • creating a license[1]
    • current reports[1]
    • currents tab[1]
    • current status[1][2]
    • current utilization report[1][2]
    • custom group configuration activation[1]
    • custom groups[1][2]
    • custom groups driven by FlexNet Publisher options file[1]
    • customize actions needed to enable access to Altair Accelerator products on Windows[1]
    • custom views[1][2][3][4]
  • D
    • daemon, automatic start[1]
    • daemon control[1]
    • daemon manager utility[1]
    • daemon operation[1]
    • daemons[1]
    • Dassault DSLS[1]
    • database[1]
    • database backup[1]
    • database configuration options[1]
    • database control[1]
    • database control options[1]
    • database daemon[1]
    • database engine versions and upgrades[1][2]
    • database export[1]
    • database loading commands[1]
    • database location[1]
    • database schema[1]
    • database tasker[1]
    • database tasks[1][2]
    • data collection commands[1]
    • data files[1]
    • data population[1][2]
    • debugging[1]
    • debug log[1]
      • configuration[1]
      • enable FlexNet Publisher[1]
      • file-based configuration[1]
      • joint monitoring[1]
      • rotating[1]
      • specification[1]
      • stand-alone monitoring[1]
      • static[1]
      • time zones[1]
      • web-based configuration[1]
    • denial data files[1]
    • denial percentage calculation[1][2]
    • denial plot[1][2]
    • denials[1]
    • denial statistics and details[1][2]
    • deobfuscation[1]
    • detailed widget listing[1]
    • determine the current engine version[1]
    • distributed network monitoring[1][2]
    • document organization[1]
    • download Monitor[1]
    • DSLS log file[1]
    • dump previous release databases[1]
    • duration histogram[1]
  • E
    • email map page[1]
    • email notifications are not being received[1]
    • enable Altair Accelerator for non-interactive shells[1]
    • enable CLI access on UNIX[1]
    • enable CLI access on Windows[1]
    • enable FlexNet Publisher debug logs[1]
    • enable Monitor to detect short license checkouts[1]
    • enable the command prompt to communicate with a running product server[1]
    • enable the shell to communicate with a running product server[1]
    • ensure visibility for tags not actively being monitored[1]
    • expirations page[1][2]
    • export data[1]
    • exported jobs directory[1]
    • external webserver[1]
    • extract the cli-based lmagent SFD executable[1]
  • F
    • failover.csh[1]
    • failover configuration, tips[1]
    • failover server candidates[1]
    • false denial filtering[1]
    • feature and tag specific configurations[1]
    • feature daily plots[1][2]
    • feature detailed plots[1][2]
    • feature efficiency histogram[1][2]
    • feature efficiency statistics[1][2]
    • feature heatmap[1]
    • features[1]
    • features page[1][2]
    • feature statistics[1][2]
    • file-based configuration[1][2][3][4]
    • filesystem monitoring[1][2]
    • first startup[1]
    • first steps[1]
    • FlexNet Publisher[1]
    • FlexNet Publisher debug log[1]
    • FlexNet Publisher option file[1]
    • FlexNet Publisher reservations[1]
    • FlexNet Publisher unused daemon[1][2]
    • ftlm_batch_report[1][2]
    • ftlm_batch_reports[1]
    • ftlm_capacity[1]
    • ftlm_licmgr_init[1]
    • ftlm_lmproject[1][2]
    • ftlm_parse_altiumlog[1]
    • ftlm_parse_beta[1]
    • ftlm_parse_clearcase[1]
    • ftlm_parse_codemeterlog[1]
    • ftlm_parse_debuglog[1]
    • ftlm_parse_dsls[1]
    • ftlm_parse_elan[1]
    • ftlm_parse_flexlm[1]
    • ftlm_parse_flexlmlic[1]
    • ftlm_parse_flexlmoptions[1]
    • ftlm_parse_ghs[1]
    • ftlm_parse_gns[1]
    • ftlm_parse_hasp[1]
    • ftlm_parse_icad[1]
    • ftlm_parse_lmx[1]
    • ftlm_parse_lstc[1]
    • ftlm_parse_lum[1]
    • ftlm_parse_lum_denials[1]
    • ftlm_parse_mathlm[1]
    • ftlm_parse_olicense[1]
    • ftlm_parse_qftest[1]
    • ftlm_parse_rlmstat[1]
    • ftlm_parse_rtdakey[1]
    • ftlm_parse_sentinel[1]
    • ftlm_parse_silvaco[1]
    • ftlm_parse_tsystems[1]
    • ftlm_summary[1]
    • Fujitsu ICAD[1]
  • G
    • general monitoring configuration[1]
    • generate a denials report[1]
    • generate a report[1]
    • generate a usage report[1]
    • get started with ControlCenter[1]
    • GNS[1]
    • Green Hills Legacy (Elan)[1]
    • groups[1]
    • guest access port[1]
  • H
    • heatmaps[1]
    • help, Accelerator[1]
    • historical reports[1][2]
    • home page[1][2]
    • host idle time[1][2]
    • host monitoring[1][2]
    • how can I keep track of my servers and anticipate trouble[1]
    • how do I know if a user is hogging all the licenses[1]
    • how do I know if I have too many or too few licenses[1]
    • how do I make a forecast and plan for next quarter[1]
    • how do I manage my licenses and license servers[1]
    • how vovserver failover works[1]
    • HTTP access models[1]
  • I
    • images are not showinig up in web pages[1]
    • installation[1]
    • instructions, bypass ACL[1]
    • intelligent denial scaling[1][2]
    • interfaces and security[1]
    • internal webserver[1]
    • introduction[1]
  • J
    • joint configuration for parsing debug logs (file based configuration[1]
    • joint configuration for parsing debug logs (web based[1]
    • joint debug log monitoring[1]
    • journal files[1]
  • L
    • LDAP authentication[1]
    • LDAP integration[1]
    • LDAP viewer[1]
    • legacy webserver[1]
    • license management overview[1]
    • license managers, remote[1]
    • license managers, supported[1]
    • license server management[1]
    • license server monitoring[1]
    • license server section[1][2]
    • license violation effects and actions[1]
    • licensing[1]
    • LicManager[1]
    • links[1][2][3]
    • live monitoring and manual parsing[1]
    • lm_parse_remotelm[1]
    • LM_PROJECT[1]
    • LM_PROJECT and UNIX group tracking[1]
    • lmmgr[1][2]
    • lmmgr reset[1]
    • lmmgr stop[1][2]
    • LOAD_REMOTE_DATA[1]
    • load a database[1]
    • load the database[1]
    • locked licenses[1]
    • LSTC[1]
    • LUM[1]
  • M
    • machine load monitoring[1][2]
    • maintenance tasks[1]
    • manage data from different orgins[1]
    • manage tags in database[1]
    • manage tags in server memory[1]
    • manual backups[1]
    • manual data loading[1]
    • manually annotate the database with project information[1]
    • manually parse a debug log[1]
    • method 1: use windows explorer to set command line environment[1]
    • method 2: using Windows command prompt to set command line environment[1]
    • Monitor[1]
    • Monitor, editions[1]
    • Monitor, features[1]
    • Monitor, licensing[1]
    • Monitor, theory of operation[1]
    • Monitor overview[1]
    • monitor processes[1]
    • monitors tab[1]
    • Monitor User Guide[1]
    • monitory system diagram[1]
    • move a database[1]
    • multi-site support[1]
    • my checkouts page[1][2]
    • my view section[1][2]
  • N
    • navigation[1]
    • ncmgr stop[1]
    • network monitoring[1]
    • network tab[1][2]
    • no historical data is being displayed[1]
    • notification[1][2]
  • O
    • obtain server credentials[1]
    • OLicense[1]
    • online help[1]
    • OS-based authentication on UNIX[1]
    • OS-based authentication on Windows[1]
    • other configurations[1]
  • P
  • Q
    • QF-Test[1]
    • query the vovserver[1]
    • quick start guide[1]
  • R
    • raw data[1][2]
    • raw data URLs[1][2]
    • rebuild a database from source data files[1]
    • recommended Monitor hardware setup[1]
    • reduce the sampling period for all license moniors[1]
    • reference topics[1]
    • register and log in[1]
    • register security changes[1]
    • release notes, 2016.09[1]
    • release notes, 2016.09 Update 1[1]
    • release notes, 2016.09 Update 2[1]
    • release notes, 2016.09 Update 3[1]
    • release notes, 2016.09 Update 4[1]
    • release notes, 2016.09 Update 5[1]
    • release notes, 2016.09 Update 6[1]
    • release notes, 2016.09 Update 7[1]
    • release notes, 2016.09 Update 8[1]
    • release notes, 2016.09 Update 8.1[1]
    • release notes, 2016.09 Update 8.1-1[1]
    • release notes, 2016.09 Update 8.1-2[1]
    • release notes, 2016.09 Update 9[1]
    • release notes, 2016.09 Update 9.1[1]
    • release notes, 2016.09 Update 9.2[1]
    • release notes, 2016.09 Update 9.3[1]
    • release notes, 2016.09 Update 9.4[1]
    • release notes, 2016.09 Update 10[1]
    • release notes, 2016.09 Update 10.1[1]
    • release notes, 2016.09 Update 11[1]
    • release notes, 2016.09 Update 11.1[1]
    • release notes, 2016.09 Update 11.2[1]
    • release notes, 2016.09 Update 11.3[1]
    • release notes, 2016.09 Update 11.4[1]
    • release notes, 2016.09 Update 11.5[1]
    • release notes, 2016.09 Update 12[1]
    • release notes, 2016.09 Update 13[1]
    • release notes, 2016.09 Update 13.1[1]
    • release notes, 2016.09 Update 14[1]
    • release notes, 2016.09 Update 15[1]
    • release notes, 2016.09 Update 16[1]
    • release notes, 2016.09 Update 16.1[1]
    • release notes, 2016.09 Update 17[1]
    • release notes, 2016.09 Update 18[1]
    • release notes, 2016.09 Update 19[1]
    • release notes, 2016.09 Update 20[1]
    • release notes, 2021.1.0-p1[1]
    • release notes, 2021.1.1[1]
    • release notes, 2021.1.1-p1[1]
    • release notes, 2021.2.0[1]
    • release notes, 2021.2.0-p1[1]
    • release notes, 2021.2.0-p2[1]
    • release notes, 2021.2.0-p3[1]
    • release notes, 2021.2.0-p4[1]
    • release notes, 2021.2.0-p5[1]
    • release notes, 2021.2.1[1]
    • release notes, 2021.2.1-p1[1]
    • release notes, 2021.2.1-p2[1]
    • release notes, 2021.2.1-p3[1]
    • release notes, 2022.1.0[1]
    • release notes, 2022.1.0-p1[1]
    • release notes, 2022.1.1[1]
    • release notes, 2023.1.0[1][2]
    • release notes, 2023.1.1[1]
    • release notes, 2023.1.2[1]
    • release notes, 2023.1.2-hf1[1]
    • release notes, 2023.1.2-p1[1]
    • release notes, 2023.1.2-p2[1]
    • release notes, 2023.1.2-p3[1]
    • release notes, 2024.1.0[1]
    • release notes, 2024.1.1[1]
    • remotely controlled monitoring agent configuration[1]
    • Remote Monitor[1]
    • remove a tag[1]
    • rename a tag[1]
    • rename tags[1]
    • report_simple.tcl[1]
    • report_tag.tcl[1]
    • reports examples[1]
    • reprise, status commands[1]
    • Reprise RLM[1]
    • request a license file[1]
    • reservation overdraft analysis[1][2]
    • reservations[1][2]
    • reservations, current[1][2]
    • reservations, historical[1][2][3][4]
    • reset Monitor[1]
    • restart, crash recovery[1]
    • restore a database from backups[1]
    • rotating debug log[1]
  • S
    • sample a license server[1][2]
    • sampling methodology[1]
    • script wrapping example[1]
    • security[1]
    • security analysis[1]
    • security principles[1]
    • Sentinel HASP[1]
    • Sentinel RMS[1]
    • server and file control[1]
    • server candidates[1]
    • servercandidates.tcl[1][2]
    • serverinfo.tcl[1]
    • server operation[1]
    • servers page[1][2]
    • set a default view from existing views[1]
    • set feature capacity[1]
    • setting up SSH keys[1]
    • setup.tcl[1]
    • set up Monitor[1]
    • set up Monitor as a service[1]
    • set up Monitor to manually parse debug logs[1]
    • set up my views[1]
    • set up views[1]
    • Silvaco[1]
    • smtp configuration page[1]
    • SNAPSHOT_CAPACITY[1]
    • source data backups[1]
    • specify the current project[1]
    • standalone configuration for parsing debug logs (file based configuration[1]
    • standalone configuration for parsing debug logs (web based[1]
    • stand-alone debug log monitoring[1]
    • stand-alone monitoring agent configuration[1]
    • start and configure the server[1]
    • start Monitor manually on UNIX[1]
    • start Monitor manually on Windows[1]
    • static debug log[1]
    • status command specification[1]
    • supported browsers[1]
    • supported license managers[1]
    • supported operating systems[1]
    • supported platforms[1]
    • system[1]
    • system description[1]
  • T
    • table-based reports[1]
    • tag access, configure[1]
    • tag administration[1]
    • tag names[1]
    • tags[1]
    • tasks[1]
    • the drop down menus do not stay open in Internet Explorer[1]
    • theory of operation[1]
    • theory of operation, Monitor[1]
    • time zones[1]
    • token, normalization[1]
    • token-based subfeatures[1][2]
    • track a project[1]
    • troubleshooting[1][2]
    • troubleshooting the UNIX setup[1]
    • T-Systems[1]
  • U
    • unavailable data[1]
    • unused daemon[1][2]
    • UPDATE_MEMBERSHIPS_FROM_FILE[1]
    • UPDATE_MEMBERSHIPS_FROM_LDAP[1]
    • UPDATE_MEMBERSHIPS_FROM_NIS[1]
    • UPDATE_PROJECTS[1]
    • UPDATE_SUMMARIES[1]
    • updated data from license servers is not being received[1]
    • update summary table[1]
    • upgrade the database engine[1]
    • usage comparison plot[1][2]
    • usage information in FlexNet Publisher debug logs[1]
    • usage reports[1]
    • usage trends[1][2]
    • use Accelerator help[1]
    • user management[1]
    • use vovselect for querying[1]
    • using a license[1]
    • using the graphical user interface[1]
    • using widgets[1]
    • utilization plot[1][2]
  • V
  • W
    • web-based configuration[1][2][3]
    • web-based custom group configuration[1]
    • web-based project configuration[1]
    • web interface[1]
    • web interface is not responding[1]
    • web server configuration[1]
    • what is the difference between monitor samples data and logs data in a history details report?[1]
    • when is the best time to run a job[1]
    • why isn't my job running[1]
    • widget PHP integration example[1]
    • widgets[1]
    • widgets summary listing[1]
    • windows domain accounts[1]
    • Wolfram MathLM[1]
    • working with remote license servers[1]
    • workweek definition[1]
    • wrapping unlicensed tools[1]
  • X
    • X-Formation LM-X[1]