report

Report outputs and visualization configuration.

Settings

advance: true = Advance style report with MultiCPU, false = Normal style report with 1CPU.; Supported values: true
Convert PPT to PDF: Converts PowerPoint slide to PDF file.
avoid_duplicate_slide: true = duplicate slides avoided, #duplicate issues shown under instance, false = all of the issues for single pairs will be reported.; Supported values: true
Fullmodel-image: Full model image will be shown in wireframe in all Verification slides at the left top image. This takes additional time for generating wireframe imaged.; Default/Allowed : OFF/ON
imageType-Verification: To reduce slide size the JPG format can selected. By default, the h3d option allows you to view the results in 3D view.; Default/Allowed : h3d/jpeg

visualization settings define configurations related to visualization.

bg

Background colors to be used for creating H3D files and images.

h3d: The background color to be used when creating H3D files.; Supported values: 255, 255, 255, 255, 255 255
jpg: The background color to be used when creating JPG image files.; Supported values: 49, 111, 255, 95, 181 266

color

Default colors for various check results.

comparison

Default colors for comparison check.

master: Color number for Master component.; Supported values: Color Number, ex - 12
slave: Color number for Slave component.; Supported values: Color Number, ex - 6
unmatched: Color number for unmatched entities.; Supported values: Color Number, ex - 33
WT-Calculation: Option to display the weight in the reports. true - will enable the display and false - will disable the display.; Supported values: true or false
WT-Comparison: Option to display the delta weight in the reports. true - will enable the display and false - will disable the display.; Supported values: true or false
WT-Graph: Option to display the weight graph in the reports. true - will enable the display and false - will disable the display.; Supported values: true or false
WT-Graphtype: Option to choose the waterfall graph type. The values 0 / 1 / 2 / 3 represent the available graph types.; Supported values: 0, 1, 2, 3
WT-Scalefactor: Multiplies the weight with the specified multiplication factor.; Supported values: A desired multiplication factor. Default is 1.

intersection

Default colors for intersection test.

master: Color number for Master component.; Supported values: Color Number, ex - 55
slave: Color number for Slave component.; Supported values: Color Number, ex - 21
master-intersecting: Color number for intersecting elements on the master component.; Supported values: Color Number, ex - 62
slave-intersecting: Color number for intersecting elements on the slave component.; Supported values: Color Number, ex - 47

transparency

Transparency settings.

intersection

Transparency settings for intersection check.

master: The choice to turn on transparency for the master component. True enables transparency and false makes the component opaque.; Supported values: true or false
slave: The choice to turn on transparency for the main component. True enables transparency and false makes the component opaque.; Supported values: true or false
level: The level of transparency on a scale of 0 to 10. 0 being no transparency and 10 being completely transparent.; Supported values: Number, ex - 3

comparison

Transparency settings for comparison.

level-assembly: The level of transparency on a scale of 0.5 to 7, with 0.5 being high transparency and 7 being less transparent.; Assembly (ON/OFF) converts matched entries into transparency mode in the first page of the PPT (OFF by default).

intersection

Visualization related settings for intersection reporting.

cross

Settings related to Cross.

length: The length of the cross as a percentage of the model length.; Supported values: Percentage, ex - 8
width: The width of the cross as a percentage of the model length.; Supported values: Percentage, ex - 0.15

sphere

Sphere dimension for the sphere.

radius: The radius of the sphere as a percentage of the cross length.; Supported values: Percentage, ex - 2
color: The color to be used for the sphere by specifying the corresponding color number from the palette.; Supported values: Percentage, ex - 3

reportgroup

multiple = Multiple slides in single PPT.

Supported values: single / multiple

spotweld

Setting related to spot weld check reporting.

cross

Settings related to cross.

length: The length of the cross as a percentage of the model length.; Supported values: Percentage, ex - 8
width: The width of the cross as a percentage of the model length.; Supported values: Percentage, ex - 0.15

sphere

Sphere dimension for the sphere.

radius: The radius of the sphere as a value in model units.; Supported values: Percentage, ex - 2
color: The color to be used for the sphere by specifying the corresponding color number from the palette.; Supported values: Percentage, ex - 3

clip

Clip dimensions.

radius: Attribute - TBD.; Supported values: Value in model units, ex - 150

hvp

DO NOT CHANGE.

Supported values: Text Value, ex – HvpLeft, HvpRight

bordercolor: Border color of the HVP title note.; Supported values: Color Number, ex - 2
titlefontsize: Title font size.; Supported values: Color Number, ex - 2
titlecolor: Title Color.; Supported values: Color Number, ex - 4
titlefont: Title Font.; Supported values: Color Number, ex - 1

comparisonunified settings:

max-record

Supported values: 50

template

The file name of the MS PowerPoint template to be used for reporting.

Supported values: File name, ex – “Template_compare.potx”

template-sheet

Name given to template.

skip-assembly-slide

Skip the assembly image in the first slide of MS PowerPoint.

skip-thumbnail-slide

Parameter to skip second page of Comparison PowerPoint and Excel report.

skip-thumbnailassemblyimage

Parameter to skip assembly image in Comparison PowerPoint (checkbox).

template-ppt

Path of the power point template.

percentage-sequence

This is the parameter for arranging the order of thumb nail images of components in the PowerPoint.

Supported values:

0 – Default order.
1 – Match percent in decreasing order.
2 – Part IDs in decreasing order.

resultslide

This is the parameter to get the default multiple slides for multi-variant comparison or to get single slide which shows the best match result.

Supported values:

Default – Multiple slides are shown.
Best match – Best matches for each components are shown from the multiple variants.

threshold_report

This is an intermediate percentage value to be given between threshold value and maximum value. The components having match percent value between threshold and threshold_report value is shown in green color and the components with value between threshold_report and maximum value in gray color.

result-review

Result display setting after comparison check is completed. The following options can be selected to display unmatched entities on graphics.

tempNodes: Displays unmatched area as temp nodes.
tempComps: Displays unmatched area as elements in red color.
tempComps+Node XYZ: Displays unmatched area as elements in red and exports unmatched nodes in a text file working folder.
legend-detailed: Applicable for Quick Comparison flag ON, unmatched elements are shown in red color.
legend-overview: Applicable for Quick Comparison flag ON, unmatched elements are not shown in red color showing high level results.

range-legend-level

Applicable for Quick Comparison flag ON. Comparison legend left tab Ranged's number of levels are controlled by these values. 0 to 100% values are split by these values. An example in case of 30-90% match results exist, 90-30/7=8.57 splits will be shown.

threshold-ranges

Applicable for Quick Comparison flag ON. Comparison legend right tab Discrete's levels are controlled by these values. The accepted value is from 30 to 99.9 with spaces between values.

Default: 50 80 90 (result legend will display 0-30, 30-50, 50-80, 80-90, 90-100. Specific range will be ignored if no results found).

thumbnail-assemblyImageColor

Applicable for quick Comparison flag ON. Part color shown inside the assembly thumbnail image, it is in the 2nd page of the Powerpoint report.

Default: Dark blue.

thumbnail

Text displayed below thumbnail image, supports PID or Part Name. It is in the 2nd page of the Powerpoint report.

Default: PID.

Show unmatched ribs

Parameter to display unmatched surfaces for the Honeycomb kind of Rib pattern. The default is OFF.

Q-Compare

This option can be used if comparison performance is main concern. It reads Base and Variant model data and compares them on the screen. Interface and workflow is similar to default comparison with few limitations.

Default/Allowed : OFF/ON

Assembly-View: If this option is ON, Matched/Unmatched parts color can be controlled for the Assembly images in the summary report. Parts unmatched/matched color can be controlled using these check box color options.; Default: OFF/ON.

Intersection settings are related to reporting for intersection check.

max-slide: Maximum number of slides to be included in the PPT file.; Supported values: Number (for example, 50).
ignore_part_Instance: Ignores part instances from intersection check and report. This is applicable if the number of parts in the model are more then 300.; Default: ON.
ignore_name_Instance: Ignores parts if their Part Names and Part Number are almost the same from intersection check and report. This is applicable if the number of parts in the model are more then 300.; Default: ON.
display_intersection_depth: Displays intersection depth value in a text box inside HyperView player.; Default: OFF.

text-static

You can enter the information.

Supported values:

object: “Text left”
description: “Intersection Check”
object: “Text right”
description: “Answer:”
object: “Info3”
description: “_”
object: “Info4”
description: “_”
object: “Info5”
description: “_”
object: “Info6”
description: “_”

spotweld settings:

max-slide

Maximum number of slides to be included in the PPT file.

Supported values: Number,ex-50

text-static

You can enter the information.

Supported values:

object: “Text left”
description: “Spotweld Check”
object: “Text right”
description: “Answer:”
object: “Info3”
description: “_”
object: “Info4”
description: “_”
object: “Info5”
description: “_”
object: “Info6”
description: “_”

spot-comparison settings:

max-slide

Maximum number of slides to be included in the PPT file.

Supported values: Number,ex-50

template

The file name of the MS PowerPoint template to be used for reporting.

Supported values: File name, ex – “Template.potx”

text-static

You can enter the information.

Supported values:

object: “Text left”
description: “Spotweld Comparison”
object: “Text right”
description: “Answer:”
object: “Info3”
description: “_”
object: “Info4”
description: “_”
object: “Info5”
description: “_”
object: “Info6” 
description: “_”

freepart settings:

max-slide

Maximum number of slides to be included in the PPT file.

Supported values: Number,ex-50

template

The file name of the MS PowerPoint template to be used for reporting.

Supported values: File name, ex – “Template.potx”

layout

DO NOT CHANGE.

Supported values: Number, ex – 2

text

description: DO NOT CHANGE.; Supported values: Text Value, ex – “Text1”
project: DO NOT CHANGE.; Supported values: Text Value, ex – “Info1”
id: DO NOT CHANGE.; Supported values: Text Value, ex – “Info7”
date: DO NOT CHANGE.

text-static

You can enter the information.

Supported values:

object: “Text left”
description: “Connection Check”
object: “Text right”
description: “Answer:”
object: “Info3”
description: “_”
object: “Info4”
description: “_”
object: “Info5”
description: “_”
object: “Info6”
description: “_”