WinProp_MS_AdditionalResults

Data Fields

Detailed Description

Structure to specify additional outputs to be generated when using WinProp_SuperposeMS::compute. The overall power will be written as soon as this structure is specified.

Field Documentation

outputPath
char WinProp_MS_AdditionalResults::outputPath[500]
The path to which the additional results will be written
filterOrder
int WinProp_MS_AdditionalResults::filterOrder
The filter order, set to zero to disable filtering of the results
enableASCIIoutput
int WinProp_MS_AdditionalResults::enableASCIIoutput
Set to (1) to enable or (0) to disable output of ASCII files
channelMatricesPerPoint
int WinProp_MS_AdditionalResults::channelMatricesPerPoint
The channel matrices per point (1) enabled or (0) disabled
channelMatricesPerRay
int WinProp_MS_AdditionalResults::channelMatricesPerRay
The channel matrices per ray (1) enabled or (0) disabled
channelMatrixResultMode
WINPROP_MS_CHANNEL_MATRIX_MODE WinProp_MS_AdditionalResults::channelMatrixResultMode
The channel matrix result mode
conditionNumber
int WinProp_MS_AdditionalResults::conditionNumber
The condition number (1) enabled or (0) disabled
powerAzimuthSpectrum
int WinProp_MS_AdditionalResults::powerAzimuthSpectrum
The power azimuth spectrum (1) enabled or (0) disabled
powerAzimuthSpectrumResolution
double WinProp_MS_AdditionalResults::powerAzimuthSpectrumResolution
The angle resolution for the power azimuth spectrum resolution in degree (value between [0.25, 180.0])
propagationPaths
int WinProp_MS_AdditionalResults::propagationPaths
The propagation paths (1) enabled or (0) disabled
perStreamPower
int WinProp_MS_AdditionalResults::perStreamPower
The per stream power (1) enabled or (0) disabled
perSubChannelPower
int WinProp_MS_AdditionalResults::perSubChannelPower
The per sub channel power (1) enabled or (0) disabled
subChannelPowerSampleFreqStep
int WinProp_MS_AdditionalResults::subChannelPowerSampleFreqStep
The sub channel power sample frequency step
spreadLogLin
int WinProp_MS_AdditionalResults::spreadLogLin
Compute delay/angular spread/mean based on (1) linear or (0) logarithmic values
spreadPowerField
int WinProp_MS_AdditionalResults::spreadPowerField
Compute delay/angular spread/mean based on (1) fieldstrength or (0) power values
delaySpread
int WinProp_MS_AdditionalResults::delaySpread
The delay spread (1) enabled or (0) disabled
angularSpread
int WinProp_MS_AdditionalResults::angularSpread
The angular spread (1) enabled or (0) disabled
angularMean
int WinProp_MS_AdditionalResults::angularMean
The angular mean (1) enabled or (0) disabled
dopplerShift
int WinProp_MS_AdditionalResults::dopplerShift
The doppler shift (1) enabled or (0) disabled, only available for trajectories
dopplerSpread
int WinProp_MS_AdditionalResults::dopplerSpread
The doppler spread (1) enabled or (0) disabled, only available for trajectories
propSimF8
int WinProp_MS_AdditionalResults::propSimF8
The PropSimF8 input (1) enabled or (0) disabled, only available for trajectories
propSimAbsDelay
int WinProp_MS_AdditionalResults::propSimAbsDelay
The PropSim results with (1) absolute or (0) relative delays, only available for trajectories
impedanceCouplingMatrix
int WinProp_MS_AdditionalResults::impedanceCouplingMatrix
The impedance coupling matrix (1) enabled or (0) disabled
channelCapacity
int WinProp_MS_AdditionalResults::channelCapacity
The channel capacity (1) enabled or (0) disabled
capacityMode
WINPROP_MS_CHANNEL_CAPACITY_MODE WinProp_MS_AdditionalResults::capacityMode
The channel capacity mode
capacityOutage
float WinProp_MS_AdditionalResults::capacityOutage
Outage probability for channel capacity in percent
The documentation was generated from the following file:
  • source.eng/SuperposeMS/winprop_superposems_types.h