WinProp_Carrier
Data Fields
- int
- CarrierID
- int
- SystemID
- int
- MimoID
- float
- CellLoad
- float
- NoiseRiseUL
- float
- PowerBackoffPilotDL
- int
- Numerology
- int
- SymbolsPerSlot
- int
- NrAntennaBeams
- double
- BeamGainCtrlServer
- double
- BeamGainCtrlInterferer
- double
- BeamGainDataServer
- double
- BeamGainDataInterferer
- int
- TDD_Slots_DL
- int
- TDD_Slots_UL
- int
- TDD_Slots_Flex
Detailed Description
Configuration of Carriers.
Field Documentation
- CarrierID
-
- int WinProp_Carrier::CarrierID
- Index of carrier (if network planning API is used afterwards).
- SystemID
-
- int WinProp_Carrier::SystemID
- Index of system to which the antenna belongs. If SystemID == -1, the antenna does not belong a system.
- Same carrier, different SystemID => Interference
- Same carrier, same SystemID => No interference
- Different carriers (independent of SystemID) => No interference
- MimoID
-
- int WinProp_Carrier::MimoID
- Index of MIMO stream assigned to this antenna. If MimoID == -1, it is a regular antenna. Antennas of MIMO systems must be in the same system, i.e. SystemID must be set to the same value for all antennas belonging to the MIMO system. The first antenna in a MIMO system has MimoID == 1, the second antenna has MimoID == 2 and so on.
- CellLoad
-
- float WinProp_Carrier::CellLoad
- Load of this cell, only relevant for network planning (see WinProp_Net_Project_Open). Set to -1 to use the default load. Needs to be in the interval [0.0, 1.0].
- NoiseRiseUL
-
- float WinProp_Carrier::NoiseRiseUL
- The noise rise [dB] in uplink for static analysis, only relevant for network planning (see WinProp_Net_Project_Open). Set to -1 to use the default value.
- PowerBackoffPilotDL
-
- float WinProp_Carrier::PowerBackoffPilotDL
- The power backoff for pilot [dB], relative to max. power. Only relevant for network planning (see WinProp_Net_Project_Open). Set to -1 to use the default value.
- Numerology
-
- int WinProp_Carrier::Numerology
- The numerology. Only relevant for 5G network planning.
- SymbolsPerSlot
-
- int WinProp_Carrier::SymbolsPerSlot
- Number of symbols per slot. Only relevant for 5G network planning.
- NrAntennaBeams
-
- int WinProp_Carrier::NrAntennaBeams
- Number of antenna beams. Only relevant for 5G network planning.
- BeamGainCtrlServer
-
- double WinProp_Carrier::BeamGainCtrlServer
- Beamforming Gain for control serving carrier. Only relevant for 5G network planning.
- BeamGainCtrlInterferer
-
- double WinProp_Carrier::BeamGainCtrlInterferer
- Beamforming Gain for control interfering carrier. Only relevant for 5G network planning.
- BeamGainDataServer
-
- double WinProp_Carrier::BeamGainDataServer
- Beamforming Gain for data serving carrier. Only relevant for 5G network planning.
- BeamGainDataInterferer
-
- double WinProp_Carrier::BeamGainDataInterferer
- Beamforming Gain for data interfering carrier. Only relevant for 5G network planning.
- TDD_Slots_DL
-
- int WinProp_Carrier::TDD_Slots_DL
- Number of downlink symbols in a slot. Only relevant for TDD 5G network planning.
- TDD_Slots_UL
-
- int WinProp_Carrier::TDD_Slots_UL
- Number of uplink symbols in a slot. Only relevant for TDD 5G network planning.
- TDD_Slots_Flex
-
- int WinProp_Carrier::TDD_Slots_Flex
- Number of flexible symbols in a slot. Only relevant for TDD 5G network planning.
The documentation was generated from the following file:
- source.eng/Interface/WP_Carrier.h