- Array Board Size Check
Check an item for the panel board size to see if the size is standard. Follow the instructions to set checking parameters.
- Board Spacing
Analyze clearances between the contour of the array board and the sub-boards.
- Board Origin Offset
Check the design boards origin points.
- Cutting Region
Check the cutting holes design rule, location, and clearance to other objects.
- Data Existence
Verify the certain layers existence and data existence on the layer.
- Dummy PCB
Verify the copper existence in the dummy area of an arrayed board.
- Fiducial Mark
Verify that fiducial marks are designed correctly on the paneling board.
- Guide Hole
Validate the guiding hole in the PCB's design.
- Guide Line
Check item for the soldering guide line width and the drawing layers clearance with other geometries or objects.
- Jig Hole
Detect the JIG hole that drives in Jig machine.
- Label Box
Check the label box existence or size.
- Layer Stack-up
Check the Board, Copper, Dielectric, Solder Mask Thickness.
- Min Silk Width
If silkscreen data is drawn with a thin width, it’s difficult to recognize it.
- Missing Hole
Often, Missing Hole is also referred to as Cutting Region.
- PCB Mark
Recognize a single board by machinery and check the rules about PCB marks.
- PCB Outline Sharp Angle
Analyze the sharpness of the PCB outline.
- PCB Outline Spacing
Verify the clearance between a single board outline and various objects.
- PCB Outline Width
Check the width of the PCB outline.
- Routing Slit
Check the rule for the routing slit on the PCB design.
- Solder Mark Violation
Verify the solder mask is in the PCB design and if it overlaps with routing patterns.
- SMT Direction Mark
SMT direction marks placement checking item on special layer.
- Sub Board Misarrangement
Check if single boards have the same distance to panel or have placing type.
- Sub Board Placement
Check the sub-boards placement order and soldering direction.
- V-Cut
Check the V-Cut and its region in the panel board.
