Create Loads From Free-Body Sections
Create Displacement/Rotation Loads
Create an Include file where free-body displacements and rotations are properly realized as loads (enforced displacements) for the selected sections and selected loadcases in the model.
-
From the Post ribbon, select the FBD Manager tool from
the Plot group.
Figure 1. 
The guide bar is displayed. -
From the guide bar, click
to display the options. Define the Tolerance to limit
load creation if magnitude is below the tolerance.
- From the guide bar's drop-down menu, select Create loads.
- Select free-body sections.
- Select loadcases to consider.
-
From the microdialog, click Imposed
disp
.
-
Select enforced displacement DOFs to consider and click
Create
.
Create Force and Moment Loads
Create an Include file where free-body forces and moments are properly realized as loads for the selected sections and loadcases in the model.
-
From the Post ribbon, select the FBD Manager tool from
the Plot group.
Figure 2.
The guide bar is displayed. -
From the guide bar, click to display the options. Define the Tolerance.
- From the guide bar's drop-down menu, select Create loads.
- Select free-body sections.
- Select loadcases to consider.
- From the Force contributions drop-down menu, select Free body forces/moments or Grid point forces/moments.
- If Grid point forces/moments is selected, select relevant contributions to take into account.
-
From the microdialog, click Force and
moment
.
-
Select enforced displacement DOFs to consider and click
Create
.