Intermediate Pattern

Check the thickness which deviates from the pad edge.

When a pattern exists between component pins, it should not be thicker than the given distance.
  • Target Component Definition
    • All Components: All components on board will be target components.
    • Component Group Selection: Select target components from component group list.
  • Option
    • Include Via Pad: Option to include the Via Pad.
  • Checking
    • Allowable maximum Distance: Set the maximum distance value from the pad edge in which routing pattern should be kept.
    • Allowable maximum Ratio(%): Set the maximum ratio value by using invaded area of the routing pattern between pads.