pltIPlot SetTipToTailSelectionMethod

Sets the selection method for the tip-to-tail curve.

Syntax

pltIPlot_ctrl SetTipToTailSelectionMethod method

Application

HyperGraph Polar Plot/Tip to Tail functionality.

Description

This command sets the selection method for the calculation and drawing of the tip-to-tail curve.

Inputs

method
Options include
“none”
None of the vectors is selected. Manual selection is not allowed.
“all”
All vectors are selected. Manual selection is not allowed.
“displayed”
Based only on the displayed vectors, you can select vectors manually.
“selected”
Based on all vectors of the plot, you make selections.
This command is only valid for polar plots, vector mode.

Example

None of the vectors is included in the calculation and drawing of tip-to-tail curve. Tip-to-tail curve is off.
pltIPlot_Ctrl SetTipToTailSelectionMethod none 

All vectors are included in the calculation and drawing of tip-to-tail curve.  
pltIPlot_Ctrl SetTipToTailSelectionMethod all 

You can manually select from the list which vectors should be included in the calculation and drawing of tip-to-tail curve.  
pltIPlot_Ctrl SetTipToTailSelectionMethod selected

Errors

Returns an error code for invalid arguments.