Home
EDEM Creator
EDEM Creator is the pre-processor for creating an EDEM simulation model, including setting up equipment and defining the generation of bulk materials.
Creator Tree-Geometries
Creator Tree-Geometries allows you to use Geometry sections to construct the environment in which your bulk material interacts.
Factories
You can use Particle factories to define where, when, and how Particles/Meta-Particles appear in a simulation. The following types of particle factories are available - Static, Dynamic, Block, Volume Packing, and Recorded.

Welcome
About EDEM
EDEM is a high-performance simulation software for bulk and granular materials.
What's New
New features and enhancements available in EDEM.
Release Notes
This section contains information about the EDEM release, such as key features, enhancements, bug fixes, and known issues.
Tutorials
Start using EDEM functionality with our interactive tutorials.
Get Started with EDEM
The EDEM user interface comprises three icons for each simulation component - Creator, Simulator, and Analyst.
EDEM Creator
EDEM Creator is the pre-processor for creating an EDEM simulation model, including setting up equipment and defining the generation of bulk materials.
- Creator Tree-Project
  Creator Tree-Project allows you to define the title and description for the simulation.
- Creator Tree-Bulk Material
  Creator Tree-Bulk Material allows you to add bulk material and bulk material particle shapes to a model and define their interactions.
- Creator Tree-Equipment Material
  Creator Tree-Equipment Material allows you to add equipment material to a model and define interactions between materials.
- Creator Tree-Geometries
  Creator Tree-Geometries allows you to use Geometry sections to construct the environment in which your bulk material interacts.
  - Select Geometry Sections
    You can select Geometry sections by clicking the required Geometry in the Viewer window. The Geometry in the Creator Tree is highlighted.
  - Create a New Geometry Section
    You can create sections in EDEM or import them from a CAD program to create particle factories.
  - Import Geometry Sections
    Instead of defining Geometry using EDEM, you can import Geometries from a variety of CAD applications.
  - Work with Geometry Sections
    You can replace, copy, and merge Geometry sections. You can also create Geometry groups.
  - Geometry Motions
    Sections of a Geometry can be static or dynamic. Static sections remain in a fixed position during the course of a simulation whereas dynamic sections move. Sections can move under fixed translation, rotation, conveyor motion, or sinusoidal motion.
  - Factories
    You can use Particle factories to define where, when, and how Particles/Meta-Particles appear in a simulation. The following types of particle factories are available - Static, Dynamic, Block, Volume Packing, and Recorded.
    - Create Static Factories
      Static factories produce particles/Meta-Particles at a specified time. Simulation is paused during particle creation.
    - Create Dynamic Factories
      Dynamic factories produce particles over the duration of a simulation. Simulation continues as the particles are created.
    - Create Block Factories
      You can create a bed of material in the selected Geometry. However, the tool is only available for Box Geometries.
    - Volume Packing
      You can use the Volume Packing tool to create a large number of particles instantaneously by filling a volume Geometry with particles based on a user-defined solid fraction.
    - Recorded Factories
      Recorded Factories allow you to record the material flow in one area of a simulation to use as a factory in another simulation. The running simulation of any material entering the Recorder box is tracked and written to a file. Once the simulation is complete, the recorded data can be used as a factory in any subsequent simulation. You can have multiple recorded factories and recorders in a simulation.
    - Rigid Link Condition
      Rigid Link is a factory setup parameter that allows you to link particles with a single specified Geometry, whether physical or virtual. Once linked, the particles will follow its motion.
- Creator Tree-Environment
  Creator Tree-Environment allows you to define global settings for the simulation in the Environment section.
- Creator Tree-Physics
  Creator Tree-Physics allows you to add Physics interactions.
EDEM Simulator
EDEM Simulator is a powerful solver used for fast and efficient simulations.
EDEM Analyst
EDEM Analyst is the post-processor used to analyze and visualize the results of your simulation.
EDEM Contact Models
A Contact Model describes how elements behave when they come into contact with each other.
EDEM Cal Utility
EDEM Cal is a utility which works with EDEM and is designed to assist in performing calibration.
GPU CUDA Guide
The EDEM CUDA GPU module uses the latest General Purpose Computing on Graphical Processing Units (GPU) technology.
Programming Guide
The EDEM Programming Guide describes the EDEM API.
Coupling Interface Programming Guide
The Coupling Interface Programming Guide provides an overview of how to use the EDEM Coupling Interface to couple with a generic CFD code and/or Multi Body dynamics codes.
EDEMpy
EDEMpy is a Python library for accessing EDEM data from .h5 files (the underlying EDEM file format). EDEMpy does not require prior knowledge of advanced programming.
EDEM Solver Capabilities
EDEM contains four solver engines.
Appendix
This section provides additional information about how to estimate simulation time, supported EDEM File types, attribute definitions, and so on.
EDEM Terminology
Definitions of terms used in EDEM.
References and Bibliography
This section cites the contributions made by various authors and sources that have been used as reference material for EDEM, and the specifics of how they have been applied can be found in the individual contact model sections.

Factories

You can use Particle factories to define where, when, and how Particles/Meta-Particles appear in a simulation. The following types of particle factories are available - Static, Dynamic, Block, Volume Packing, and Recorded.

Creating Particle Factories

Any virtual surface or volume (physical or virtual) can be converted into a particle factory.

Note: Factories can only be created if a Bulk Material has been defined. A simulation can comprise any number of particle factories.

Select the Geometry section you want to use as a factory.
Right-click and select Add Factory/Add Material Block or click the icon. Optionally, select Plugin Factories from the expanded Geometries tab and right-click to import your own custom particle factory. For more information about custom particle factories, see the EDEM Programming Guide.
To switch between factory types, right-click and then select Change Factory Type.