Unsplit Surface Edges

Use the Split/Stitch tool to remove split lines so that split surfaces return to their previous unsplit state.

Note: This tool is supported for FE geometry.
  1. From the Topology ribbon, click the Split/Stitch tool.
    Figure 1.


  2. From the guide bar, select Unsplit.
  3. Select Points, Surface Edges, or Surfaces.
    • Unsplit will suppress fixed points.
    • Free and shared surface edges are handled differently. For free edges, the below options are available:
      Generate a Straight Line Between Vertices
      Figure 2.


      Extending the Edges Using Adjacent Edges as a Guide
      Figure 3.


    • Select surfaces to remove all split lines for one or more surfaces
  4. On the guide bar, complete one of the following:
    • Click to apply and stay in the tool.
    • Click to apply and close the tool.
    • Click to exit the tool without applying.