Project Filter Tool

Filter items in the model tree and details tree according to the specified criteria. The filtering can also be applied to 3D views.

In the model tree, at the top right, click the Project Filter icon to open the Project Filter dialog.



Figure 1. An example showing the unfiltered model tree and details tree (left). An example of the model tree and details tree filtered (right) shows only items with local mesh settings applied.
The following filter criteria are supported:
  • Items with errors
  • Items that are set suspect
  • Items that are hidden
  • Items with local mesh sizes
  • Items that use specified mesh settings
  • Items that use specific media
  • Items that use specific variables
The following filter criteria are supported:
  • Items with errors
  • Suspect items
  • Hidden items
  • Items with local mesh sizes specified
  • Items with coating specified
  • Items that use the specified mesh settings
  • Items that use the specified medium
  • Items that use the specified variable
  • Faces that use a specified solution method
  • Regions that use a specified solution method
  • Wires that use a specified solution method
  • Numerical Green's function items
When the Project Filter tool is active, the text (filtered) indicate that the model or details tree are only showing filtered entities.


Figure 2. The text (filtered) indicates that Project Filter tool is active.
To disable filtering, re-open the Project Filter tool and unselect the filter items.