Automatic mode

1. User input parameters

Label	Symbol	Tooltip, note, formula
Phase sequence	*	Phase sequence (all modes).
No. parallel paths	P _paths	Number of parallel paths (all modes).


Building the winding architecture - Automatic mode
1	Selection of Automatic mode for building the winding architecture.
2	Definition of the phase sequence i.e. the rotation direction of the Magneto-Motive Force (M.M.F): Clockwise or Counterclockwise (Clockwise or C. clockwise). The rotation direction is defined when facing the machine on the connection side.
3	Number of parallel paths. The possible numbers of parallel paths are automatically computed and proposed to the user. When the user chooses a number of parallel paths the connections on the winding scheme are automatically updated. See examples below.
4	Button to apply inputs. Pressing the enter key twice applies inputs too.
5	Button to restore default input values. Default values are those which define the winding architecture by using the automatic mode.
6	Icon to export winding data into a text file


Building the winding architecture – The number of parallel paths is represented in the winding scheme
1	Example where the No. parallel paths is equal to 1.
2	Example where the No. parallel paths is equal to 8.