AOI-AXI

Checks components on the board that obstruct the field of vision by the height of specific parts.

Figure 1.

More detailed information:

• Board Direction Definition: Decide the board's placement status using the soldering mark or by defining the soldering direction.
  • Soldering-Mark Component Group: Define the soldering mark. Use if it is registered as a group of components.
    • Mark Direction: Define the mark’s direction and the soldering direction.
  • Soldering Direction: Define the direction of the board without using soldering-mark case.
• Checking:
  • Item: Specify the item name.
  • Target Component: Set the target components from the component group list.
  • Camera Angle: Set the tilt of the camera.
  • Projection: Select the camera projection direction.

    
    
    Figure 2.

  • Victim Component: Set the target components from the component group list.
  • Measure Base: Set the victim component measurement base.