Home
Manage Files and Data
Create, open, import, and save models.
Export Files
Export various file types from the selected client to another format.
HyperMesh Comments
If you insert special comment cards into your input deck, you can provide HyperMesh with additional information about the colors and names of entities. You can also use comments to preserve information that is not supported by a particular solver, for example, assemblies or system references.
HMENDDOC
Import comment that indicates the end of the model documentation into HyperMesh.

Welcome
What's New
View new features for Altair HyperWorks 2024.1.
Get Started
Learn the basics and discover the workspace.
Tutorials
Learn more about the Altair HyperWorks suite of products with interactive tutorials.
Startup Procedures and Customizations
Start and configure the applications.
Tool Finder
View a list of deprecated panels and their newer, equivalent workflows.
Manage Files and Data
Create, open, import, and save models.
- Supported File Types
  The following file types can be read, depending upon the active application.
- Create New Files
  Create a new file.
- Open Files
  Open a file.
- Import Files
  Import various file types into the selected client.
- Warning Messages When Loading Files
  When loading an .hm file, you may receive a warning message depending on the version and solver interface in which the file was last saved.
- Change Solver Interfaces
  Load a different solver interface in the application.
- Conversion Between Solver Formats
  Convert finite element models to another solver format.
- Load Files
  Load command files, scripts, solver template files, preferences, or the Metadata Table.
- Save Files
  Save all of the data in your current session.
- Export Files
  Export various file types from the selected client to another format.
  - CAD Export
    Learn about the CAD readers supported by the application and the options available for exporting CAD geometry data.
  - Solver Deck Export
    Export solver input files.
  - 3D Model Export
    Export 3D models.
  - Curve Export
    Export plot data in several different formats so that it can be read by other software applications.
  - Connector Export
    Learn about exporting connector files.
  - HyperMesh Comments
    If you insert special comment cards into your input deck, you can provide HyperMesh with additional information about the colors and names of entities. You can also use comments to preserve information that is not supported by a particular solver, for example, assemblies or system references.
    - HM_ASSEM
      Import comment to sort and organize entity types into HyperMesh.
    - HM_COMP_BY_PROP
      Import comment to sort and organize entity types into HyperMesh.
    - HMASSOC
      Associate an existing node to an existing surface.
    - HMASSEM
      Import comment to sort and organize entity types into HyperMesh.
    - HMASSEM_COMP_ID
      Import comment to sort and organize entity types into HyperMesh.
    - HMASSEM_ID
      Import comment to sort and organize entity types into HyperMesh.
    - HMBEAMSEC
      Import comment to sort and organize property types and info into HyperMesh.
    - HMBEGINDOC
      Import comment that indicates the beginning of the model documentation into HyperMesh.
    - HMCOMP
      Import comment to sort and organize entity types into HyperMesh.
    - HMCOMP_ID
      Assign property directly or indirectly to elements and organize the elements.
    - HMCONT
      Continuation card for the HMBEAMSEC card.
    - HMCURVE
      Preserves the style information for load curves.
    - HMDB
      Points to a material database file for the solver.
    - HMDISPLAY
      Defines the base location of a velocity load in HyperMesh.
    - HMDPRP
      Import comment to sort and organize design properties into HyperMesh.
    - HMENDDOC
      Import comment that indicates the end of the model documentation into HyperMesh.
    - HMENT
      Preserves the ADMASS card upon import in Radioss.
    - HMERROR
      Export comment that detects a problem upon export.
    - HMFIXEDSURFPOINT
      Describes weld points for the automesher.
    - HMFOOTERBEGIN
      Import comment that indicates the beginning of the footer for the deck.
    - HMFOOTEREND
      Import comment that indicates the end of the footer for the deck.
    - HMFLAG
      HMFLAG
    - HMGPMV
      Defines a conduction group identification number in HyperMesh.
    - HMMOVE
      Change the input component of an element.
    - HMNAME
      Import comment to sort and organize entity types into HyperMesh.
    - HMNAME ASSEM
      Import comment to sort and organize entity types into HyperMesh.
    - HMNAME COMP
      Import comment to sort and organize entity types into HyperMesh.
    - HMNAME GROUP
      Import comment to sort and organize entity types into HyperMesh.
    - HMNAME MAT
      Import comment to sort and organize entity types into HyperMesh.
    - HMNAME PROP
      Import comment to sort and organize entity types into HyperMesh.
    - HMNAME SET
      Import comment to sort and organize entity types into HyperMesh.
    - HMORIENT
      Defines a global origin for the analysis.
    - HMOUTPUT
      Gives the date and time that the deck was written and serves as a signal that the deck was created by HyperMesh.
    - HMPLOTELM
      Preserves plot element information in solvers that do not support plot elements.
    - HMREFSYSTEM
      Re-associate nodes/systems with their local systems.
    - HMSET
      Import comment to sort and organize entity sets into HyperMesh.
    - HMSET_SET_ID
      Import comment to sort and organize entity sets into HyperMesh.
    - HMSETTYPE
      Import comment to sort and organize entity types into HyperMesh.
    - HMSUPPORT
      Import comment to associate support loads into a load collector in HyperMesh.
    - HMTAG
      Preserves tag information in solvers that do not support tags.
    - HMUNSUPPORTED
      Import comment to indicate to the reader that information in this section should be retained in the unsupported area of HyperMesh.
    - HWCOLOR
      Import comment to color an entity in HyperMesh.
  - Export Settings
    Export settings for AMF, AVI, H3D, JPEG, and GIF files.
- Include Files
  Most FEA solvers allow you to organize the input deck into separate files and provide a mechanism to include (or refer) these files in the main input deck.
- Import Templates
  Templates can be imported by means of the File > Import menu.
- Take a Screen Capture
  Record a video or take a snapshot of the screen.
- Convert Units
  Use the Units tool to convert a finite element model from its initial unit system to a new unit system.
Sessions and Report Templates
Set up sessions and create report templates.
Interface with External Products
Solver interfaces supported in HyperMesh.
Entities and Solver Interfaces
A solver interface is made up of a template and a FE-input reader.
Browsers
Browsers provide a structured view of model data, which you can use to review, modify, create, and manage the contents of a model. In addition to visualization, browsers offer features like search, filtering, and sorting, which enhance your ability to navigate and interact with the model data.
Sketching
Create and edit 2D parametric sketch geometry.
Topology
Create, edit, and cleanup geometry.
FE Geometry
FE geometry is topology on top of mesh, meaning CAD and mesh exist as a single entity. The purpose of FE geometry is to add vertices, edges, surfaces, and solids on FE models which have no CAD geometry.
Meshing and Elements
Explore the different types of mesh you can create in HyperMesh and create and edit 0D, 1D, 2D, and 3D elements.
Model Build and Assembly
Create, organize and manage parts and subsystems.
Composites
HyperMesh composites modeling.
Connectors
Create connections between parts of your model.
Morph
Rapidly change the shape of the FE mesh without severely sacrificing the mesh quality.
Skeleton Modeling
Create a reduced ordered model to facilitate optimization at the concept phase.
Design Space
Workflow to support topology optimization model build and setup.
Optimization
Setup an Optimization in HyperMesh.
Design Explorer
Multi-disciplinary design exploration and optimization tools.
Validate
Validate the model built before running solver analysis.
Analyze
Models require loads and boundary conditions in order to represent the various physics and/or physical equivalents to bench and in-use testing.
Axisymmetry
Reduce a full 3D model with axisymmetric surfaces while accounting for imperfections.
Concept Modeling
Tools and workflows that are dedicated to rapidly creating new parts for specific use cases, or amending existing parts. The current capabilities are focused on stiffening parts.
Crash and Safety
Tools used for crash and safety analysis.
Airbag
Use airbag folder utilities and export a resulting airbag in a Radioss deck.
Aerospace
Essential utility tools developed using HyperMesh-Tcl.
Aeroelasticity
Import an aeroelastic finite element model with Nastran Bulk Data format.
Certification
Framework to plug certification methods to assess margin of safety from the model and result information.
PhysicsAI
Use PhysicsAI to build fast predictive models from CAE data. PhysicsAI can be trained on data with any physics or remeshing and without design variables.
Results Data
Results data can be post-processed using both HyperMesh and HyperView.
Developer
The Developer ribbon contains tools for automation and customization.
Plot Data
HyperGraph is a data analysis and plotting tool with interfaces to many file formats.
Multibody Modeling
MotionView is a general pre-processor for Multibody Dynamics.
Media Files
MediaView plays video files, displays static images, tracks objects, and measures distances.
Tabulate Results
Use TableView to create an Excel-like spreadsheet.
Text Files
TextView math scripts reference vector data from HyperGraph windows to automate data processing and data summary.
Publishing and Reporting
Create, define, and export reports.

HMENDDOC

Import comment that indicates the end of the model documentation into HyperMesh.

The $HMENDDOC card indicates the end of a card used for model documentation. Any number of comment lines can be placed before this line. The beginning of this block is indicated by a $HMBEGINDOC statement. Only one model documentation block is allowed per model. Upon import, the comments within the block are placed in the control card “Model Documentation”.

Syntax

HMENDDOC

Type

HyperMesh Comments

Input

N/A

Supported Solvers

OptiStruct