Home
Connections
Connections are used to define the association of different regions of interest between parts in an assembly.
Virtual Connector
Virtual connectors are rigid imaginary parts created between selected faces/spots representing geometrical support of the connector.
Shock Absorbers
Create a virtual shock absorber with finite stiffness and damping between two different parts or between a single part and ground. Virtual shock absorber is applied on spots.

Welcome
What's New
View new features for SimSolid 2024.
Get Started
Learn the basics and discover the workspace.
Tutorials
Discover SimSolid functionality with interactive tutorials.
Interface with External Products
Interfaces that support SimSolid output file format.
Geometry
Information about treatment and properties of geometric entities in SimSolid.
Assembly
Summary of available functionality for defining the properties and behavior of parts in the model.
Connections
Connections are used to define the association of different regions of interest between parts in an assembly.
- Regular Connections
  Regular connections can be used to define contact-based connections between parts in an assembly.
- Precise Connections
  SimSolid creates precise connections on the fly during geometry import and are grouped under the Precise connection folder.
- Welds
  Welding is a process that joins materials, usually metals by using heat or pressure.
- Adhesives
  Structural adhesives are simulated as thin layers of adhesive material associated with a connection.
- Virtual Connector
  Virtual connectors are rigid imaginary parts created between selected faces/spots representing geometrical support of the connector.
  - Pin
    Connect an arbitrary number of coaxial cylindrical faces.
  - General Connector
    Create a rigid imaginary rigid part between arbitrary faces/spots.
  - Remote Support
    Connect faces or spots to a ground support.
  - Bushing
    Define directional stiffness and inertia coefficients.
  - Imported Bushing
    Defines directional stiffness between two parts that lie within specified diameter from the bushing center via importing a .csv file.
  - Rivet
    Connect multiple part with rivets of a given diameter.
  - Remote Mass
    Connect faces/spots of a single part to a remote mass represented as mass and moments of inertia.
  - Joints
    Connect faces/spots that can have relative motion in the form of displacements and/or rotations.
  - Cable/Rod
    Create a virtual cable/rod with finite or infinite stiffness between two different parts or between a single part and ground. Virtual cable/rod is applied on spots.
  - Superelements
    Used to import a DMIG file which is the reduced representation of the behavior and performance of a structure or a part of a structure.
  - Shock Absorbers
    Create a virtual shock absorber with finite stiffness and damping between two different parts or between a single part and ground. Virtual shock absorber is applied on spots.
- Connection Review
  A table that shows all connections in a specified design study.
- Review Part Connection Locations
  Diagnose connection problems.
- Review Part Connections
  Review connections on selected parts.
- Show Disconnected Groups
  Identify groups of parts that are disconnected from the model.
Create Analysis
Create an analysis for your project.
Boundary Conditions
Boundary Conditions available for SimSolid.
Post Processing
Run analyses and view a variety of results in SimSolid.
Design Study
Design studies allow you to quickly evaluate and compare the structural performance from different design scenarios.
Verification Problems
Solved verification models.

Shock Absorbers

Create a virtual shock absorber with finite stiffness and damping between two different parts or between a single part and ground. Virtual shock absorber is applied on spots.

Note: Shock absorbers with damping are only supported for complex eigen value analysis. Running modes are automatically run as complex modes.

In the Project Tree, click the Connections workbench.
On the Connections workbench, select Shock absorber.
For Type, select Shock absorber or Ground shock absorber.
If Type is set to Shock absorber, do the following.
1. Select End1, and then select the spot.
2. Repeat for End2.
If Type is set to Grounded shock absorber, do the following.
1. Select End1, and then select a spot.
2. Switch to Ground, and then enter the coordinates of the ground point.
Define Stiffness and Damping.
Click Apply.
The virtual connector will appear in the Connections branch. If selected, you will see vectors representing the connection in the modeling window.