Identify the components that represent the model's body.
Body panels are modeled with a wall boundary condition and a zero velocity is
applied.
Identify the model body in the following ways:
Use the Identify Body tool.
From the Setup ribbon, click the
Identify Parts tool.
Figure 1.
From the secondary tool set, click the Body
tool.
Figure 2.
Select the components that represent the model's body.
Right-click on a part in the modeling window or the
Model Browser and select Identify As > Body from the context menu.
Select a part in the modeling window or the Model Browser then change the Identify As field to
Body in the Property Editor.
Note: Activate thermal functionality by enabling
Thermal Model in the Run
dialog. All body parts support a defined temperature via the
Temperature BC parameter.
Tip: Open the Property Editor and review the parameters
associated with a particular body component by left-clicking on parts identified as
a body in the Model Browser.
