Home
Setup
Prepare your model and run the simulation.
Aerodynamic and Aeroacoustic Setup
Prepare your model for wind tunnel analysis using ultraFluidX.
Prepare the Model
Set up the wind tunnel and prepare the aerodynamics and parameters of your model.
Define the Mesh Controls
Use the Mesh Controls tool to define regions with a user-defined volume element size.

Welcome
What's New
View new features for HyperMesh CFD 2024.1.
Get Started
Learn the basics and discover the workspace.
Onboarding Resources
Discover HyperMesh CFD functionality with interactive tutorials and community resources.
Solution Layers
Solution-centric workflows allow you to traverse through modeling environments using a dedicated UI layer.
Manage Files and Data
Create, open, import, and save models.
Convert
Use the Convert tool to convert entire models between data types.
Geometry Modeling
Manage CAD, FE, and 2D parametric sketch geometry.
Meshing
Generate surface/volume mesh by defining mesh controls, or interactively create and edit 2D surface mesh.
Setup
Prepare your model and run the simulation.
- General Setup
  Prepare your model for a general AcuSolve simulation.
- Aerodynamic and Aeroacoustic Setup
  Prepare your model for wind tunnel analysis using ultraFluidX.
  - Transfer Data
    After preparing your model, use the Data Transfer tool to transfer mesh data to the environment used for aerodynamic and aeroacoustic setup.
  - Parts and Assemblies
    Manage the parts and assemblies that make up your model.
  - Prepare the Model
    Set up the wind tunnel and prepare the aerodynamics and parameters of your model.
    - Define the Unit System
      You can change the unit system using the Unit System Selector or the Preferences. When importing "discrete mesh" files (.stl, .nas, .fem) with unspecified units, select the model unit in the Import Options dialog.
    - Create Coordinate Systems and Align Parts
      Use the Systems tool to define local coordinate systems and translate the parts needed to align the model.
    - Define Wind Tunnel
      Use the Edit Tunnel tool to define the size of the wind tunnel.
    - Define Turbulence Source Regions
      Use the Turbulence tool to generate turbulence source regions.
    - Position the Car
      Use the Move tool to position the car inside of the wind tunnel.
    - Identify Parts
      Use the Identify Parts tool to define types of parts like wheels, heat exchangers or body panels, which require specific modeling techniques for the CFD run.
    - Part Properties
      Selecting a part allows you to set values for various properties.
    - Adjust Ride Height
      Use the Ride Height tool to adjust the heave, pitch, and roll of the model.
    - Adjust Part Normals
      Use the Normals tool to identify and correct the surface normal directions on parts.
    - Define the Mesh Controls
      Use the Mesh Controls tool to define regions with a user-defined volume element size.
      - Adjust the Far Field Element Size
        Use the Mesh Controls: Far Field tool to change the element sizing.
      - Generate and Edit Box Refinement Zones
        Use the Mesh Controls: Box tool to apply box shaped refinement zones around the entire body of the vehicle, or around individual parts.
      - Generate Body-Fitted Refinement Zones
        Use the Mesh Controls: Offset tool to refine mesh within a given distance from the entire vehicle body.
      - Generate Part-Fitted Refinement Zones
        Use a subset of the Mesh Controls: Offset tool to refine mesh based on the distance from a specific part of the model.
      - Generate Custom Refinement Zones
        Create an arbitrary refinement zone around a closed volume.
      - Review Mesh Controls and Import/Export Templates
        Review and edit all of the refinement zones in your model and import/export mesh control templates.
      - Define Mesh Controls
        Use the Mesh dialog to define mesh settings.
    - Define Fluid Materials
      Use the Material tool to define a fluid material for the wind tunnel.
    - Define the Belt System
      Use the Belt System tool to model a belt system.
    - Define the Output Controls
      Use the Output tool to create output controls.
  - Analysis
    Submit jobs and view reports.
Post-Processing
Post-process the simulation results by creating visualizations and measurements.
Automation
Automate simulation processes with templates and utility scripts.
Design Exploration
Once the baseline model is prepared, you can define morph volumes, morph geometry, create design shapes and run DOE studies. These tool work for both AcuSolve and ultraFluidX-based workflows.
Solver Help
More resources for AcuSolve and ultraFluidX solvers.

Define the Mesh Controls

Use the Mesh Controls tool to define regions with a user-defined volume element size.

Important: All other mesh controls in the model are defined relative to the far field size, and must be a power of 2 of the far field size. For example, if you define a far field mesh size of 1 m, the available refinement sizes will be 0.5, 0.25, 0.125, etc.