Defining Solution Coefficient Data from File
Import solution coefficient data (multi-frequency or single frequency) from a .sol file to create a solution coefficient data definition. Use the solution coefficient data definition when defining a solution coefficient source.
Note: Export surface currents on specified structures to a
.sol file using a domain
decomposition request.
-
On the Construct tab, in the Define group, click the
Field/Current Data icon. From the drop-down list
select 
Import Solution Coefficient Data From File.
Figure 1. The Import Solution Coefficient Data dialog. 
- In the Solution coefficient data (*.sol) file field, browse to the file location.
-
Specify the data block to be used:
- To select data from a multi-frequency .sol file, select the Use all data blocks check box. The data is interpolated for use at the operating frequency.
- To select data at a specific frequency in the .sol file, clear the Use all data blocks check box and enter the number of the relevant data block.
- In the Label field, specify a unique label for the solution coefficient data.
- Click Create to define the spherical modes data and to close the dialog.