Create Variability Study

Use the Variability Study tool to examine how squeak and rattle risks are affected by manufacturing variations.

1. From the SnRD ribbon, Setup group, select the Variability Study tool from the Variability Study tool group.

   Figure 1.

2. From the guide bar, select the type of model parameter to include in the variation study.
3. In the modeling window, select the appropriate model parameter.
   Tip: You can also make this selection from the Advanced Selection dialog by clicking from the guide bar.
4. In the microdialog, specify the lower and upper bounds for the variation.

   Figure 2.

5. Optional: Click to update the name.
6. From the guide bar, complete one of the following options:
   • Click to create the variation and remain in the tool.
   • Click to create the variation and exit the tool.
   • Click to exit the tool without creating the variation.
   The variation study with design variables is created for all selected study parameters.
7. Optional: Review and edit the created variation studies and variables.
   1. From the SnRD ribbon, Setup group, select the Review Variations tool from the Variability Study tool group.

      Figure 3.

      The Review Variation Studies dialog opens.
   2. Review and edit the variation studies and variables.
   3. Close the dialog.