Post Processing

Launch and explore SnRD Post Processing.

Post processing requires the model used for analyzing the squeak and rattle phenomena and the solver deck (.FEM) exported from the pre-processing module.

This solver deck is used throughout post-processing for creation of contour plots.

  1. From the menu bar, click HyperMesh > HyperView.
    HyperView opens.
  2. From the menu bar, click File > Load > Preferences File.
    The Preferences dialog opens.
  3. Select Squeak & Rattle and click Load.
    The SnRD tab is generated on the menu bar.
  4. From the menu bar, select SnRD > SnRD-Post.
    The SNRD-Post Browser opens.
    Figure 1.
Use the SNRD-Post Browser to complete the following:
  • Load files and post process results.
  • Perform Sensitivity Analysis to understand and evaluate modal sensitivity.
  • Study squeak and rattle effects under Combined Loadings.
  • Setup optimization solver decks after evaluating modal sensitivity and elimination methods.
  • Study and analyze Stochastics and Design of Experiment runs.