Perform Combined Loadings Analysis

Use the Combined Loadings tab to review and analyze the effects of Dynamic and Static loads on the gap and relative displacement.

Important: The Combined Loadings tab is only activate when dynamic and static loadcases are identified in the imported model file.
See Combined Loadings for more information.
  1. If necessary, open the SNRD-Post Browser.
    Note: For more information, see Post Processing.
  2. In the SNRD-Post Browser, select the Combined Loadings tab.
  3. Select a loadstep from Loading type 1 list.
  4. Select a static loadstep from Loading type 2 list.
  5. Enter Scale factor values.
  6. Optional: Select the Affects gap check box.
  7. Select the required E-Line or All from E-Line(s) Selection list.
  8. Select the required analysis type from Session Type.
  9. Click Combine Results.
The combined effect of the selected loadsteps on the E-Lines is evaluated and the results are plotted, relative displacement and histograms.