poIFLDCtrl SetContourMode

Sets the FLD contour type.

Syntax

poIFLDCtrl_handle SetContourMode "distance"|"zone"|"failure_percentage"

Application

HyperView Tcl Modify

Description

This command sets the current contour type for FLD in HyperView.

Example

To set the current contour mode to "Failure Contour(%)" for FLD case 1:
Note: The example below assumes that an FLD is currently plotted in a HyperView session.
hwi OpenStack
hwi GetSessionHandle session_handle
session_handle GetProjectHandle project_handle
project_handle GetPageHandle page_handle [project_handle GetActivePage]
page_handle GetWindowHandle window_handle [page_handle GetActiveWindow]
window_handle GetClientHandle client_handle

client_handle GetModelHandle model_handle [client_handle GetActiveModel]
model_handle GetResultCtrlHandle result_handle
result_handle GetFLDCtrlHandle fld_ctrl

fld_ctrl AddCase
fld_ctrl GetCaseHandle caseH 1
caseH SetContourMode "failure_percentage"

fld_ctrl SetEnableState true
client_handle Draw
hwi CloseStack

Errors

Returns 0 if successful, otherwise an error code.