ncmgr start

vncmgr: Usage Message

USAGE:
        % ncmgr start [options]
OPTIONS:
        -h                      This help.
        -force                  Do not ask confirmation.
        -block                  Do not return to the shell or command prompt
                                after starting. This is only useful, and
                                required, when starting Accelerator as a
                                Windows service.
        -port  <port|mode>      Specify port number, port number list (colon
                                separated) or port mode. Modes are:
                                automatic - hash queue name into port number,
                                            do not start if port is
                                            unavailable.  The default queue
                                            name 'vnc' hashes to port
                                            6271.
                                any - hash queue name into port number, try
                                      additional ports in increments of 1
                                      until an available one is found. The
                                      default queue name 'vnc' hashes to
                                      beginning port 11437.
                                Default: any
        -eventport <port[:port]> Colon separated update port list wherein each
                                 element may be of the form:
                                 N         - An integer specifying the exact
                                             port number to use.
                                 automatic - Calculates hash of project name
                                             to derive a single port number.
                                 any       - Calculates hash of project name
                                             to derive starting port number.
                                             Ports are checked sequentially
                                             up to 30000.
                                 Event port will be non-functional if there is a
                                 conflict with specified ports (default 5559).
        -webport <port|mode>    Specify a dedicated web interface port for
                                HTTP and HTTPS protocols.  This port must be
                                configured to enable REST API v3 interface,
                                to enable the dashboard web UI page,
                                and to enable SSL.  A value of 0 directs
                                VovServer not to open a web interface port.
                                Specify port number, port number list (colon
                                separated) or port mode.  Modes are:
                                automatic - hash queue name into port number,
                                            do not start if port is
                                            unavailable.  The default queue
                                            name 'vnc' hashes to web port
                                            6271.
                                any - hash queue name into port number, try
                                      additional ports in increments of 1
                                      until an available one is found. The
                                      default queue name 'vnc' hashes to
                                      beginning web port 9695.
                                Default: Any
        -webprovider <provider>    Specify the provider for
                                   HTTP and HTTPS protocols.
                                   This must be either "internal" or "nginx".
                                   Default: "internal"
        -roport  <port|mode>    Specify read-only guest access web interface
                                port. A value of 0 disables this interface,
                                requiring all web interface users to log in.
                                Default: 0
        -pubkey  <key>          Specify the public VOV security key to be added 
                                to a new project. If -pubkey is not specified,
                                the public key listed in ~/.vov/userkey or 
                                %PROFILE%/.vov/userkey is added.
        -q, -queue <name>       Name for queue (default is $NC_QUEUE if set,
                                and otherwise vnc).

        -dir <dir>              Directory of the server
                                (default $VOVDIR/../../vnc).
        -dbhost <host>          Host for database.
        -dbroot <path>          Path on database host for database files.
        -dbport <port>          Port of the database to listen for
                                connections.
        -v                      Increase verbosity.
EXAMPLES:
        % ncmgr start -port 6271
        % ncmgr start -port 6271:6272:6273:any -force
        % ncmgr start -q bigqueue -dir /remote/queues