Inputs

1. Standard inputs

  1. Speed

    The only default input parameter is the "operating speed" of the machine to be used in the back-EMF test.

2. Advanced inputs

The list of advanced inputs dedicated to this export are listed below.

For more details please refer to the list of generic advanced inputs.

  1. Number of computations per electrical period

    The default value is equal to 50. The minimum allowed value is 13.

  2. Number of computed electrical periods

    The default value is equal to 2. The minimum allowed value is 1 and the maximum value is equal to 10.

  3. Rotor initial position mode

    By default, the “ Rotor initial position mode ” is set to “ Auto ”.

  4. Rotor initial position
  5. Mesh order

    The default level is second order mesh.

  6. Airgap mesh coefficient

    Airgap mesh coefficient is set to 1.5 by default.