Home
Structures
Set up your model and run a structural analysis or optimization.
Model Setup
Create connections and apply loads, constraints, materials, and manufacturing controls to your model.
Manufacturing Controls
Apply manufacturing constraints using shape controls and bead patterns.
Shape Controls
Use the Shape Controls to apply optional constraints to your model such as draw directions or symmetry.
List Shape Controls
Use the Shape Controls table to view and manage shape controls that have been applied to your model.

Welcome
What's New
Discover new features and enhancements.
Get Started
New to Inspire? Learn the basics here.
Tutorials
Start using Inspire with our interactive tutorials.
Parametric Modeling
Create parametric sketches, geometry, and PolyNURBS with construction history and variables.
Implicit Modeling
Create implicit models with primitives, lattices, point clouds, fields, offsetting, Booleans, inverting, smoothing, morphing, and filleting.
Structures
Set up your model and run a structural analysis or optimization.
- Model Setup
  Create connections and apply loads, constraints, materials, and manufacturing controls to your model.
  - Connections
    Create and define connections such as fasteners, joints, connectors, spot welds, and contacts.
  - Loads and Constraints
    Apply loads and supports, displacements, accelerations, gravity, temperatures, and center of gravity.
  - Materials and Libraries
    Create materials, assign materials to parts, and organize them into libraries.
  - Concentrated Masses
    Use the Masses tool to create a concentrated mass either on a part or at a point in space.
  - Systems
    Use the Systems tool to create and apply user-defined coordinate systems to loads, supports, and displacements.
  - Manufacturing Controls
    Apply manufacturing constraints using shape controls and bead patterns.
    - Shape Controls
      Use the Shape Controls to apply optional constraints to your model such as draw directions or symmetry.
      - Draw Directions
        Draw directions are used to ensure that a design space can be physically manufactured using a specific process such as casting, stamping, or extrusion.
      - Symmetry and Cyclic Repetition
        Symmetry and cyclic repetition are used to create optimized shapes with repeating patterns and/or nearly symmetric results.
      - List Shape Controls
        Use the Shape Controls table to view and manage shape controls that have been applied to your model.
    - Bead Patterns
      Beads are used to help meet specific design requirements such as stiffness when running a topography optimization on a surface.
  - Mesh Controls
    Use mesh controls to assign an element size to parts or faces.
  - Temperatures
    Use the Temperature tool to simulate the effects of temperature changes on your model.
  - Center of Gravity (COG)
    Use the Center of Gravity Constraint (COG) tool to apply, reposition, and set upper and lower bounds for a center of gravity constraint. COG constraints are used to limit the position of the center of gravity while running a topology optimization.
  - Gravity
    Use the Gravity tool to apply gravitational acceleration (G) and adjust its direction.
- Structural Analysis
  Set up and run a linear static analysis using the SimSolid or OptiStruct solver. You can also analyze normal modes and buckling modes.
- Structural Optimization
  Set up and run a topology, topography, or gauge optimization.
- Report
  Generate PPT or PDF reports from analysis results. The Report tools are available after you have run an analysis.
Motion
Set up and run a motion analysis, plot the results, and export the results.
Fluids
Prepare and run a computational fluid dynamics simulation.
Design Explorer
Evaluate designs by using geometric variables and applying a design-of-experiments (DOE) or optimization method. We recommend fully constraining your sketch when sketch variables are used in the design exploration.
Manufacture
Set up and run a basic porosity or thinning analysis.
Print 3D
Prepare and run an additive manufacturing simulation, and export a file for 3D printing.
Rendering
Adjust the materials and environment of objects in the scene to create a photorealistic image.
Inspire Python API
Learn how to access the Inspire Python API including online help, quick start demos, and the Extension Manager.
Reference
View the glossary, frequently asked questions, and errors and alerts.
Keyboard Shortcuts and Mouse Controls
Learn keyboard shortcuts and mouse controls for common operations.

List Shape Controls

Use the Shape Controls table to view and manage shape controls that have been applied to your model.

The table can be accessed from a satellite icon that appears when you mouse over the Shape Controls icon on the Structure ribbon.

Table 1. Table Options
	Click the icon to show/hide the shape control in the modeling window.
Name	Click in the Name field to edit the name of the shape control.
Type	Click in the Type field to change the type of shape control.
Part	Lists the name of the part to which the shape control is applied.