seatbeltcontrolpointss
Unless otherwise specified, data names are accessible in level 3 only.
- activesuppressed
- Returns non-zero if the entity is set inactive, 0 otherwise.
- attributesmax
- The number of attributes owned by this entity.
- color
- The 1-64 color of the entity.
- color_rgb
- The RGB color of the entity.
- config
- The configuration of the entity.
- controlpointattachment
- The ID of the entity attached to the control point.
- controlpointattachtype
- The entity type ID of the controlpointattachment.
- controlpointconstrainednode
- The ID of the constrained node entity.
- controlpointid
- The ID of the node of the control point.
- controlpointlocation
- The location coordinates of the node of the control point.
- controlpointparent
- The IDs of the parent seatbelt entities of the control point.
- controlpointpulleynodes
- The IDs of the nodes used in creating the pulley element.
- controlpointretractornodes
- The IDs of the nodes used in creating the retractor assembly.
- controlpointstructure
- The ID of the component used for wrap around when config 5.
- cpfullmeshtype
- The type of looping mesh.
- cpfullshelllayers
- The number of layers to be used for creating the full mesh slipring.
- cpfullshelloffset
- The gap/offset between component and slipring elements.
- cpfullshellradius
- The radius of the cylinder when cpfullmeshtype is 1.
- cpfullshellsize
- The element size in the full mesh slipring.
- cpoint_x
- The x coordinate of the control point location.
- cpoint_y
- The y coordinate of the control point location.
- cpoint_z
- The z coordinate of the control point location.
- createfullmeshslipring
- Create a full mesh slipring, if true.
- crosssectiondistance
- The distance from the end of the associated cross-section.
- crosssectionend
- The end of the associated cross-section.
- definedentity
- True if the entity is defined, false otherwise.
- deletecontrolpointattachments
- Deletes control point attachments, when set to 1.
- deletefullmeshslipring
- Deletes the full mesh slipring, when set to 1.
- deletepretensioner
- Deletes the pretensioner/retractor assembly, and takes the parent setbelt ID as input.
- deletepulley
- Deletes the pulley, and takes the parent seatbelt ID as input.
- elementabsorption
- The option deciding the percentage of elements to be absorbed.
- fullshellbeginnodes
- The ID of the set of nodes at the start of the full mesh slipring.
- fullshellcomnodes
- The ID of the set of nodes in between the start and end of the full mesh slipring.
- fullshellendnodes
- The ID of the set of nodes at the end of the full mesh slipring.
- fullshellslipringelems
- The ID of the set of elements in the full mesh slipring.
- id
- The ID of the entity.
- include
- The ID of the include file the entity is organized in.
- includeid
- The ID of the include file the entity is organized in.
- internalid
- The ID of the entity.
- internalname
- The internal name of the entity.
- linkedentity
- The IDs of the linked elements, sets, sliprings or retractors for the control point.
- moduleid
- The module ID of the entity.
- name
- The name of the entity.
- outputsuppressed
- Returns non-zero if the entity is set "do not export", 0 otherwise.
- poolid
- The pool number of the entity.
- poolname
- The pool name of the entity.
- retractorelem
- The ID of the element defining the retractor, anchor pretensioner or load limiter.
- retractorzeroelem
- The number of zero size elements at the retractor.
- solver_id
- The solver ID of the entity.
- solverkeyword
- The name of the solver keyword.
- solvername
- The solver name of the entity for entities enabled for name pool, otherwise the internal name of the entity.
Version History
2020
2020.1 - Added new data name solverkeyword.
2021.1 - Added new data names moduleid, poolid, poolname, and solver_id.
2021.2 - Added new data names internalname and solvername.