retractors

Unless otherwise specified, data names are accessible in level 3 only.

activesuppressed
Returns non-zero if the entity is set inactive, 0 otherwise.
Type: integer
attributesmax
The number of attributes owned by this entity.
Type: unsigned integer
color
The 1-64 color of the entity.
Type: integer
color_rgb
The RGB color of the entity.
Type: string
config
The configuration of the entity.
101 - LS-DYNA *ELEMENT_SEATBELT_RETRACTOR
201 – Radioss Retractor_spring
401 - PAM-CRASH RETRA
Type: unsigned integer
definedentity
True if the entity is defined, false otherwise.
Type: Boolean
EL_ID
The element ID initially connected to retractor.
Type: entity
Elem_size
The target element size for released elements.
Type: double
entityselection
The ID of the bar element selection for inside belt webbing.
Type: entity
Fct_ID1
The function identifier defining loading force scale factor versus pullout when retractor is locked.
Type: entity
Fct_ID2
The function identifier defining unloading force scale factor versus pullout when retractor is locked.
Type: entity
Fct_ID3
The function identifier defining pretension as a function of time, force versus time, length versus time, or energy versus time.
Type: entity
fedlength
The fed length.
Type: double
filmspoolcurveid
The ID of the film spool effect curve after locking.
Type: entity
flagtodisableelements
The flag to disable elements definition.
Type: unsigned integer
Force
The maximum retractor force for pretentioner locking.
Type: double
forcevalue
The retractor pretension force value.
Type: double
id
The ID of the entity.
Type: unsigned integer
include
The ID of the include file the entity is organized in.
Type: entity
includeid
The ID of the include file the entity is organized in.
Type: unsigned integer
internalid
The ID of the entity.
Type: unsigned integer
internalname
The internal name of the entity.
Type: string
lengthfractionpullin
The length fraction for retractor element pull-in.
Type: double
lengthfractionpullout
The length fraction for retractor element pull-out.
Type: double
loadingcurveid
The ID of the loading curve.
Type: entity
loadlimitcurveid
The ID of the load limit curve for the load limiter stage.
Type: entity
loadlimiter
The number of load limiter stages.
Type: unsigned integer
loadlimitflag
The flag for reference length selection.
Type: unsigned integer
loadingsensorid
The ID of the sensor triggering the load limiter stage.
Type: entity
moduleid
The module ID of the entity.
Type: integer
name
The name of the entity.
Type: string
Node_ID
The anchorage node ID.
Type: entity
outputsuppressed
Returns non-zero if the entity is set "do not export", 0 otherwise.
Type: integer
poolid
The pool number of the entity.
Type: integer
poolname
The pool name of the entity.
Type: string
pretensionercurveid
The ID of the characteristic force limit curve for the pyrotechnical pretensioner.
Type: entity
pull
The amount of pull-out between time delay ending and retractor locking, a length value.
Type: double
Pullout
The authorized amount of seatbelt release before locking.
Type: double
retractorcpoint
The ID of the seatbelt control point.
Type: entity
retractornodeid
The ID of the retractor node or node set.
Type: entity
retractorparent
The ID of the parent seatbelt.
Type: entity
seatbeltelemid
The ID of the seatbelt element or element set, depending on retractornodeid.
Type: entity
Sens_ID1
The sensor identifier for retractor locking.
Type: entity
Sens_ID2
The sensor identifier used for pretension activation.
Type: entity
sensorid1
The ID of sensor 1 of type *ELEMENT_SEATBELT_SENSOR.
Type: entity
sensorid2
The ID of sensor 2 of type *ELEMENT_SEATBELT_SENSOR.
Type: entity
sensorid3
The ID of sensor 3 of type *ELEMENT_SEATBELT_SENSOR.
Type: entity
sensorid4
The ID of sensor 4 of type *ELEMENT_SEATBELT_SENSOR.
Type: entity
signedsensors1
A positive or negative signed value.
Type: string
signedsensors2
A positive or negative signed value.
Type: string
solver_id
The solver ID of the entity.
Type: integer
solverkeyword
The name of the solver keyword.
Type: string
solvername
The solver name of the entity for entities enabled for name pool, otherwise the internal name of the entity.
Type: string
Tens_typ
The type of pretensioner.
0 - No pretention
1 - Pretension is defined by pull in length versus time function
2 - Pretension is max of force versus time function or retractor force
3 - Pretension is max of force versus time function or retractor force and Pull_Lock release
4 - Pretension is sum of force versus time function and retractor force
5 - Pretension is defined by energy versus time function
Type: integer
timedelay
The time delay after the sensor triggers.
Type: double
type
The type of retractor. Available types are node (1) or set (10).
Type: unsigned integer
unloadingcurveid
The ID of the unloading curve.
Type: entity
Xscale1
The abscissa scaling factor for function fct_ID1 and fct_ID2.
Type: double
Xscale2
The abscissa scaling factor for function fct_ID3.
Type: double
Yscale1
The retractor force.
Type: double
Yscale2
The ordinate scaling factor for function fct_ID3.
Type: double

Version History

2017.1

2020 - Added new config value 401. Added new data names color_rgb, entityselection, filmspoolcurveid, flagtodisableelements, forcevalue, lengthfractionpullin, lengthfractionpullout, loadlimitcurveid, loadlimiter, loadlimitflag, loadsensorid, pretensionercurveid, retractorcpoint, retractorparent, signedsensors1 and signedsensors2.

2020.1 - Added new data name solverkeyword.

2021.1 - Added new data names moduleid, poolid, poolname, and solver_id.

2021.2 - Added new data names internalname and solvername.

2022.2 - Added new data names EL_ID, Elem_size, Fct_ID1, Fct_ID2, Fct_ID3, Force, Node_ID, Pullout, Sens_ID1, Sens_ID2, Tens_typ, Xscale1, Xscale2, Yscale1, Yscale2. Added new config value 201.