CreatePark_dq_From_abc.PFM
Description
Create dq parameter from abc component using Park transformation.
Note: For more details about this macro, consult this additional
document
Input
- Enter component a
- Enter component b
- Enter component c
- Select the mobile mechanical set
- Enter number of poles
- Enter angle for which rotor is aligned with phase a
- Enter name of the quantity
Output
- Create 2 new I/O (FLUX_D and FLUX_Q) parameters
- If name of the quantity is flux, then create TORQUE_PARK parameter (nb_pole/2*(FLUX_D*IQ-FLUX_Q*ID)*sqrt(2)