Defining the Prediction Requests
Specify the predictions to be computed.
- Under Computed Prediction Results, select the Field strength check box.
- Under Computed Prediction Results, select the Path loss check box.
-
Under Additional Prediction Data (exported into ASCII file during
computation - required to show CIR and Paths), select the
Channel Impulse Response (CIR) check box.
Tip: Select the Consider Antenna of MS1 check box if you want to define a receiving antenna pattern to determine how much power would be received at every location by that mobile station.
In the fully polarimetric case, this requires a ray-tracing method and requires the computation of the transmission matrix.
- Under Additional Prediction Data (exported into ASCII file during computation - required to show CIR and Paths), select the Propagation Paths check box.
Note: Keep the dialog open to define additional project parameters.
1 mobile station