Home
Get Started
The WinProp Getting Started Guide contains step-by-step instructions on how to get started with WinProp.
Wi-Fi Router in a Building
This example considers the application of analyzing a Wi-Fi router in a building.
Introduction to Propagation Manager (ProMan)
The ProMan (propagation) tool is designed to predict path loss accurately between transmitter and receiver. The ProMan (network) software offers network planning modules.
User Interface Layout
View the main elements and terminology in the ProMan graphical user interface (GUI).

Welcome
Release Notes
See what's new in the latest release.
Get Started
The WinProp Getting Started Guide contains step-by-step instructions on how to get started with WinProp.
- Wi-Fi Router in a Building
  This example considers the application of analyzing a Wi-Fi router in a building.
  - Example Overview
    This example considers the application of analyzing a Wi-Fi router in a building.
  - Topics Discussed in Example
    Before starting this example, check if the topics discussed in this example are relevant to the intended application and experience level.
  - Example Prerequisites
    Before starting this example, ensure that the system satisfies the minimum requirements.
  - Introduction to Wall Manager (WallMan)
    WallMan tool is used to prepare a geometry database (3D model) that is used as part of a ProMan project. Preparing geometries in WallMan, or even just converting them from other sources in WallMan, is a common step in indoor and urban scenarios.
  - Introduction to Propagation Manager (ProMan)
    The ProMan (propagation) tool is designed to predict path loss accurately between transmitter and receiver. The ProMan (network) software offers network planning modules.
    - Launching ProMan
      Launch ProMan in Microsoft Windows using the Feko Launcher utility (which includes WinProp and newFASANT).
    - User Interface Layout
      View the main elements and terminology in the ProMan graphical user interface (GUI).
    - Creating a New Project
      Load the indoor database that was created in WallMan.
    - Defining the Antenna Site and Antenna
      For this example, a single antenna site and antenna are defined.
    - Main Computation Methods
      The three main computation methods for indoor databases in ProMan are the 3D ray tracing (SRT) model, dominant path model (DPM), and the multi-wall model (COST 231).
    - Using the Multi-Wall Model (COST 231)
      The indoor database is solved using the multi-wall model (COST 231).
    - Using the 3D Ray Tracing (SRT) Model
      The indoor database is solved using the 3D ray tracing (SRT) model.
    - Viewing the Differences in Prediction Results
      Display the difference between the two sets of prediction results obtained using the multi-wall model (COST 231) and the 3D ray tracing (SRT) model.
    - Viewing the Prediction Results in 3D
      In ProMan, the indoor database can be viewed in 3D to validate the physical structure and results.
    - Final Remarks
      This example showed how to analyze a Wi-Fi router in a building, to create the 3D model (indoor database) using WallMan and to obtain coverage plots using ProMan.
- Indoor Cell-Phone Reception
  This example considers the application of analyzing the indoor cell-phone reception, set in an urban environment.
- Base Stations in a City
  This example considers the application of analyzing base stations in a city, set in an urban environment.
- Base Stations on Hills Near a City
  This example considers the application of analyzing base stations on hills near a city, set in a rural or suburban hilly terrain.
- Network Planning
  This example considers the application of analyzing three base stations, set in a building. The network planning simulation is based on a pre-defined air interface file.
Examples
The Altair installation directory contains a collection of examples that shows you WinProp concepts and essentials.
Introduction to WinProp
WinProp is a complete suite of tools in the domain of wireless propagation and radio network planning. With applications ranging from satellite to terrestrial, from rural via urban to indoor radio links, WinProp’s innovative wave propagation models combine accuracy with short computation time.
Typical Workflow in WinProp
View the typical workflows when working with propagation simulations in specific scenarios, how to add a network planning to a propagation simulation, include a receiver pattern, set up a time-variant scenario, include multiple-input multiple-output (MIMO) at both the base station and the mobile station, connectivity analysis of sensor networks and optimization.
WallMan
The WallMan component offers a convenient facility to generate and edit vector building databases.
TuMan
The TuMan tool enables you to generate and modify tunnel scenarios.
AMan
Use AMan to generate, edit and analyze a single antenna. Superimpose multiple antennas radiating similar signals to determine the actual antenna pattern while taking into consideration the local environment.
ProMan
The ProMan component includes wave propagation models for different scenarios and network planning simulators for various air interfaces.
Methods
WinProp includes empirical and semi-empirical models (calibration with measurements possible), rigorous 3D ray-tracing models as well as the unique dominant path model (DPM).
Main Applications
In WinProp various air interfaces and applications are pre-defined: broadcasting, cellular, wireless access, WiFi, sensor networks, ICNIRP and EM compliance.
WinProp Utilities
The WinProp utilities consist of the Launcher utility and the Updater.
Appendix
Reference information is provided in the appendix.

User Interface Layout

View the main elements and terminology in the ProMan graphical user interface (GUI).

Standard toolbar

The standard toolbar gives access to commonly used menu items including New Project, Open Project, Open Result, and Save.
Project toolbar

The project toolbar gives access to tools related to editing project parameters, transmitters, sites, prediction points and launching simulations.
Component toolbar

The component toolbar gives access to tools related to components, including add cable, add antenna, and add transceiver.
Status bar

The Status bar is a small toolbar that gives quick access to absolute coordinates at the location of the mouse cursor in the 2D view.
Utility toolbar

The utility toolbar gives quick access to, for example, ray display settings, line plot, and probability density function.
Edit toolbar

The edit toolbar gives quick access to editing tools such as zooming to result, zooming to prediction area, enabling the 3D view and display settings.
Tree view

The tree view is a panel that organizes the model into network configuration-specific items and propagation results.
2D view/3D view

If the 2D view is enabled, the 2D view displays a top view of the model. If the 3D view is enabled, an isometric view of the model is displayed.
Legend

The legend is displayed to the right of the 2D view or 3D view and is linked to the displayed data.