SimSolid performs meshless structural
analysis that works on full featured parts and assemblies, is tolerant of
geometric imperfections, and runs in seconds to minutes. In this tutorial,
you will do the following:
Use the Clip Assembly with Plane display option.
Model Description
The following file is needed for this tutorial:
ClipAssemblyWithPlane.ssp
Figure 1.
This file has the following specifications:
Material is set to Steel for all parts.
Regular connections with default gap and penetration tolerance.
Open Project
Start a new SimSolid session.
On the main window toolbar, click Open Project.
In the Open project file dialog, choose
ClipAssemblyWithPlane.ssp
Click OK.
Clip Assembly With Plane
On the main window toolbar, click
(Clip assembly with plane).
Figure 2. Figure 3. The default direction of the plane is along the XY plane.
Use Shift + mouse wheel to slowly move the section
plane in the Z direction.
You can use Control + mouse wheel for faster
movement.
Use Control + left mouse button to select a surface and
orient the plane along the normal to the surface.