Home
Create Analysis
Create an analysis for your project.
Dynamics
Evaluate your design in real-time using SimSolid dynamics analysis.
Create Frequency Multi-loadcase
Use frequency multi-loadcases to run multiple frequency response analyses with common modal results.

Welcome
What's New
View new features for SimSolid 2024.1.
Get Started
Learn the basics and discover the workspace.
Tutorials
Discover SimSolid functionality with interactive tutorials.
Interface with External Products
Interfaces that support SimSolid output file format.
Geometry
Information about treatment and properties of geometric entities in SimSolid.
Assembly
Summary of available functionality for defining the properties and behavior of parts in the model.
Connections
Connections are used to define the association of different regions of interest between parts in an assembly.
Create Analysis
Create an analysis for your project.
- Structural
- Modal
- Dynamics
  Evaluate your design in real-time using SimSolid dynamics analysis.
  - Create Time Function
    Define amplitude versus time response curves for transient dynamics analysis or thermal transient analysis.
  - Create Frequency Function
    Define amplitude versus frequency response curves in frequency response dynamics analysis.
  - Create Power Spectral Density Function
    Define power spectral density (PSD) versus frequency response curves.
  - Create Frequency Multi-loadcase
    Use frequency multi-loadcases to run multiple frequency response analyses with common modal results.
  - Squeak and Rattle
    Identify squeak and rattle issues at various points along the contact surface of neighboring parts.
  - Response Spectrum Analysis
    Structural analysis method utilized to predict the maximum response of a structure subjected to dynamic loading, typically transient events such as earthquakes or blasts.
- Thermal
  Thermal analysis predicts how thermal effects propagate through the model. Steady state and thermal transient analyses are supported.
- Fatigue
  Fatigue analysis is intended for predicting life of structures under cyclic loading.
Boundary Conditions
Boundary Conditions available for SimSolid.
Post Processing
Run analyses and view a variety of results in SimSolid.
Design Study
Design studies allow you to quickly evaluate and compare the structural performance from different design scenarios.
Verification Problems
Solved verification models.
Frequently Asked Questions
This section provides quick responses to typical and frequently asked questions regarding

Create Frequency Multi-loadcase

Use frequency multi-loadcases to run multiple frequency response analyses with common modal results.

On the Main Menu toolbar, select > Frequency multi-loadcases.
Specify the modal results to which the analysis is linked.
The modal solution must exist in the current design study.
Specify the frequency span upper and lower limits.
Specify damping using Rayleigh damping coefficients or Modal damping.
Create Frequency Function.
On the workbench toolbar, select > Create new.
The new loadcase appears in the Project Tree. You can apply loads in each individual load cases.