Home
Create Analysis
Create an analysis for your project.
Thermal
Thermal analysis predicts how thermal effects propagate through the model. Steady state and thermal transient analyses are supported.

Welcome
What's New
View new features for SimSolid 2026.
Get Started
Learn the basics and discover the workspace.
Tutorials
Discover SimSolid functionality with interactive tutorials.
Interface with External Products
Interfaces that support SimSolid output file format.
Geometry
Information about treatment and properties of geometric entities in SimSolid.
Assembly
Summary of available functionality for defining the properties and behavior of parts in the model.
Connections
Connections are used to define the association of different regions of interest between parts in an assembly.
Create Analysis
Create an analysis for your project.
- Structural
- Modal
  Modal analysis evaluates the frequencies and corresponding modes of vibration of your model.
- Dynamics
  Evaluate your design in real-time using SimSolid dynamics analysis.
- Thermal
  Thermal analysis predicts how thermal effects propagate through the model. Steady state and thermal transient analyses are supported.
  - Steady State
    Thermal analysis assumes both linear and non-linear steady state conditions.
  - Thermal Transient
  - Thermal Imported
    Allows importing temperature at various points of the model for various load steps.
- Fatigue
  Fatigue analysis is intended for predicting life of structures under cyclic loading.
- Electromagnetics
- Supported Analysis Combinations
Boundary Conditions
Boundary Conditions available for SimSolid.
Post Processing
Run analyses and view a variety of results in SimSolid.
Design Study
Design studies allow you to quickly evaluate and compare the structural performance from different design scenarios.
Verification Problems
Solved verification models.
Frequently Asked Questions
This section provides quick responses to typical and frequently asked questions regarding

Thermal

Thermal analysis predicts how thermal effects propagate through the model. Steady state and thermal transient analyses are supported.

Note: Thermal analysis is supported for all connection types supported by SimSolid. The table below summarizes the connections that work as conductors and insulators. Regular connections, by default behave as conductors but they can be changed to insulators at a global level or at analysis level.

Table 1.
Conductors	Insulators
General Connector
Pins	Remote Mass
Rivets	Liquid Body
Ball Joint	Gas Body
Universal Joint	Flexible Shaft Joint
Cylinder Joint
Hinge Joint
Linear Guide Joint
Bushing
Spot welds
Laser welds