Trace on a Tryout Analysis

Choose points, lines, or edges to measure how the forming process changes the blank. Tracers are useful to determine the best sized blank and understand how the material flows during the forming process.

  1. Run a forming analysis, or if a run already exists, the trace path will appear.
  2. To see the path of a trace on the part, click in the Analysis Explorer.
  3. In the microdialog that appears, select the type of path to visualize.
    Choose from
    • Draw-in Pick a point on the sheet and see how it moves with the draw and the distance it travels.
    • Tracing Pick a point, line, or edge to project onto the final shape and trace where it started from.
    • Spotting Select a tool edge to see where it touches the sheet during forming.
  4. Optionally, select the Reference Part, then choose between available options of Points, Lines, or Edges to trace on the part.
    If you chooseSelect
    Draw-In Reference Part and Point
    Tracing Point, Line, or Edge
    Note: Optionally, select a Reference Part first.
    Spotting Point or Edge
  5. Make the selection on the part, then press on the Animation toolbar to view how the selected points/lines/edges move in space over time.
  6. Optional: Click to define the orientation of a line projection.
    Choose from
    • Local blank normal (default) Project the line onto the blank based on the local normal of the sheet. Varies with location.
    • Draw direction Use the draw direction of the current stage to project the line onto the sheet.
    • Line normal Use the normal of the plane that contains the line.
  7. Optional: Enable a full or partial trace path.
    To see a full trace path of a line projection, right-click on the line to access the context menu and select Enable Trail, or enable it in the Property Editor.

    The full trace path is enabled for a point projection by default. To see a partial trace path for a point, from the start to the current animation frame only, right-click on the path to access the context menu and select Disable Trail. The subsequent frames will not display the trail.

  8. Right-click and mouse through the check mark to exit, or double-right-click.
Tip:
  • Tracers are associated with part features. The tracer may be deleted if changes are made to the part feature or geometry associated with it.
  • Tracers can be hidden or shown by clicking their icons in the Model browser or by using the context menu.
  • You can change the color and line thickness of the tracer and its trace path in the Property Editor.

Trace Points on a Blank Without a Reference Part

  1. Run a forming analysis.
  2. In the Analysis Explorer, select Tracer .
  3. Select Tracing.
  4. Choose Point without selecting a reference part.
  5. Left-click as many points on the blank as you'd like to see traced.
  6. Click the play button to animate the results. Notice the traced lines projected from the blank as it is formed, marking how the points on the blank move in space over time.
    Note: Right-click on any of the lines to reveal a context menu to further analyze the traced points. You can create Polylines and Splines, export and isolate a trail, change the color of the trail, show properties, etc.
  7. Click the Trace Results icon to modify the color of the traced points, their thickness, and enable trail if desired.
  8. Right-click and mouse through the check mark to exit, or double-right-click.

Trace Points on a Blank Using a Reference Part

Note: This tracer is created using a reference part, so it can not be extended to other operations.
  1. Run a forming analysis.
  2. In the Analysis Explorer, select Tracer .
  3. Select Tracing.
  4. Click Reference Part and select the reference part.


  5. Select Points from the toolbar.
  6. Left-click as many points on the blank that you'd like to see traced in relation to the reference part.


  7. Click the play button to animate the results. Notice the traced lines projected from the blank as it is formed, marking how the points on the blank move on the Reference Part over time along the draw direction.


    Note: Right-click on any of the lines to reveal a context menu to further analyze the traced points. You can create Polylines and Splines, export and isolate a trail, change the color of the trail, show properties, etc.
  8. Click the Trace Results icon to modify the color of the traced points, their thickness, and enable trail if desired.
  9. Right-click and mouse through the check mark to exit, or double-right-click.

Trace Lines on a Blank Without a Reference Part

  1. Run a forming analysis.
  2. In the Analysis Explorer, select Tracer .
  3. Select Tracing.
  4. Choose Line without clicking Reference Part.
  5. Select a line to trace.
  6. Click the play button to animate the results. Notice the traced lines projected from the blank as it is formed, marking how the line on the blank move in space over time.
  7. Click the Trace Results icon to modify the color of the traced points, their thickness, and enable trail if desired.
    Note: Right-click on any of the lines to reveal a context menu to further analyze the traced points. You can create Polylines and Splines, export and isolate a trail, change the color of the trail, show properties, etc.
  8. Zoom in on a traced line to analyze it further.
  9. Right-click and mouse through the check mark to exit, or double-right-click.

Trace Material Draw-In On a Sheet

Note: This tracer is created using a reference part, so it can not be extended to other operations.
  1. Run a forming analysis.
  2. In the Analysis Explorer, select Tracer .
  3. Select Draw-In.
  4. Click Reference Part and select the reference part.


  5. Select Points from the toolbar.
  6. Left-click as many points on the blank that you'd like to see traced in relation to the reference part.


  7. Click the play button to animate the results. Notice the traced lines projected from the blank as it is formed, marking how the points on the blank move on the Reference Part over time along the draw direction.


    Note: Right-click on any of the lines to reveal a context menu to further analyze the traced points. You can create Polylines and Splines, export and isolate a trail, change the color of the trail, show properties, etc.
  8. Click the Trace Results icon to modify the color of the traced points, their thickness, and enable trail if desired.
  9. Right-click and mouse through the check mark to exit, or double-right-click.

Create Geometry from a Trace Path

  1. Create a tracer and run a motion analysis.
  2. Right-click on the tracer and select Create Spline from the context menu. A massless part is created in the Model Browser. This part can now be pushed, pulled, and otherwise manipulated.
Note:
  • To create valid splines, make sure the trace path does not loop back over itself. Try reducing the End Time to control how far the trace path extends.
  • Alternatively, you can create a polyline by selecting Create Polyline from the context menu. Polylines are segmented rather than smooth line spline curves.
  • Multiple selection is supported if you have multiple trace paths that you want to convert to splines or polylines.
  • If you want to keep a tracer for future use, ground the spline that you created or add it to a rigid group.

Spot Tool Edge on a Blank

Note: This tracer is created by selecting a tool edge of an operation, so it can not be extended to other operations.
  1. Run a forming analysis.
  2. In the Analysis Explorer, select Tracer .
  3. Select Spotting.
  4. Choose Edge without selecting a reference part.
  5. Select a tool edge to be spotted on the blank during forming.
    The tools are displayed at the start position.


  6. Click the play button to animate the results. Notice the selected edge is projected onto the blank at every step where it touches the blank and is shown for the current step.
  7. Click the Trace Results icon to modify the color of the traced points, their thickness, and enable trail if desired.
    Note:
    • Right-click on any of the lines to reveal a context menu to further analyze the traced points. You can create Polylines and Splines, export and isolate a trail, change the color of the trail, show properties, etc.
    • Joined lines are selected automatically. To select individual segments, press Ctrl and click those segments.
  8. Right-click and mouse through the check mark to exit, or double-right-click.

Tracers Table

The Tracers Table lists all of the tracers in your model and allows you to edit various attributes.

Location: Tracers tool, satellite icon

Figure 1. Tracers Table


To Do this
Rename a tracer Select the cell in the table and then click again to make the field editable.
Change the color Select the color cell in the table and then select a different option from the color palette.
Sort a column Click the column header. Click repeatedly to toggle between ascending and descending order.
Add or remove columns Right-click on a column header.

Shortcuts

To Do this
Select a reference part While a tracer is selected, hold down the Ctrl key and left-click a part to act as the paper.
Exit the tool Right-click and mouse through the check mark to exit, or double-right-click.