CONV_MAG_THERM.PFM

Description

This macro gives to the users the possibility to translate an AFIR geometry generated by INIT_AFIR macro into another adapted to run thermal simulation. More specifically, that means to transform non-mesh coils into meshed regions.

Note: For more details about this macro, consult this additional document
Note: This macro must be only used AFTER loading INIT_AFIR; it is loaded automatically after loading INIT_AFIR. So, don’t load it directly with a blank project.

Input

  • No inputs are required

Output

  • Geometrics parameters
  • Complete AFIR geometry adapted to run thermal simulation