Placing the Antenna on the Platform in CADFEKO

The antenna is placed on the platform and remeshed.

1. Unlink the mesh of the antenna and transfer the solution entities to the new port.
2. Delete the geometry instance of the antenna (only the antenna mesh will be used going forward).
3. Place the antenna on the platform (roof of the vehicle) using the Align tool.

   
   

   

   
   Figure 1. A 3D view showing the antenna placed on the roof of the vehicle. A cross-sectional view shows how the platform only intersects the PEC base.

   Note: There is no mesh connectivity between the antenna and the platform.

   
   

   

   
   Figure 2. Antenna was remeshed automatically but there is no mesh connectivity yet.